28 February 2025 in Nature Communications
Scalable fabrication of perovskite films with homogeneous structure remains a critical challenge in bridging power conversion efficiency gap between solar modules and laboratory-scale cells. To address this, we propose a slot-die coating strategy with pyrrodiazole additives in the perovskite precursor solution to simultaneously immobilize lead iodide and formamidinium iodide. This approach enhances wet film stability by suppressing colloidal aggregation, retards the crystal growth process, and ensures a consistent growth rate across the films. These effects promote the formation of large, monolithic grains, enabling large-area perovskite films with homogeneous structure, excellent uniformity, and low defect density under ambient conditions. Using this strategy, we achieved 10 cm × 10 cm inverted perovskite solar modules with a certified efficiency of 20.3%, along with good working stability and excellent application demonstration, showcasing its great potential for industrialization.
19 April 2018 in Advanced Optical Materials
1 December 2023 in Applied Physics Reviews
Inorganic tin–lead perovskites with low bandgap (1.2–1.4 eV) are desired absorber materials for solar cells owing to their ideal bandgap and compositional stability. However, such tin–lead perovskites are currently subject to inferior power conversion efficiency (PCE) and the origin remains unclear. Here, for the first time, we report the metal-cation-derived unsynchronized crystallization behavior of inorganic tin–lead perovskite, exemplifying by a representative composition CsPb0.7Sn0.3I3. A tin-perovskite-targeted crystallization modulation agent, 1-(4-fluorophenyl) piperazine (1-4FP), is introduced to synchronize the B-site alloying through its strong targeted bonding with SnI2, resulting in substantially enhanced film quality with better morphology and photoelectrical properties. Furthermore, first-principles molecular dynamics simulations reveal that the agent regulates the crystallization route toward the pure phase of CsPb0.7Sn0.3I3 by suppressing the preforming of tin perovskite. With our proposed approach, the best device attains PCE of 17.55%, which is record-high for inorganic tin–lead perovskite solar cells. In addition, treated devices show excellent stability with only 10% and negligible loss after being exposed to 1 sun intensity for 700 h and being stored in N2 after over 4000 h, respectively. Our findings open a new avenue of crystallization route design in inorganic tin–lead perovskites, so as to obtaining high-quality perovskite films and associated solar cells.
27 December 2021 in Nanoscale
We report a regulating crystallization dynamics and crystal orientation of MASnI 3 by introducing EABr additives, and an efficiency of 9.59% was achieved.
25 May 2018 in Applied Physics Express
28 December 2021 in ACS Applied Materials & Interfaces