Adsorption of CH4, CO2 and 10%CO2/CH4 on mature Qusaiba shale (1.81% TOC) is studied at 50, 100 and 150°C and 45 bars maximum pressure. Adsorption of CH4 was the lowest at all temperatures. As CO2 percentage increased, adsorption uptake increases concluding that CO2 is highly competitive and can be used to desorb CH4 and enhance gas recovery. Maximum adsorption uptakes were observed at 100°C because of the thermal decomposition of organic matter which opens more adsorption sites. Adsorption isotherms including Langmuir, Freundlich and BET are fitted to adsorption data. Langmuir isotherm showed the poorest fit with high errors and lowest coefficient of determination (R2). Nevertheless, Freundlich isotherm fitted the adsorption data perfectly with lowest errors and highest R2 reaching 0.999. Furthermore, adsorption thermodynamics parameters have also been determined. Heat of adsorption (ΔHads) negative values showed that adsorption is exothermic physical adsorption. Negative ΔGads showed that adsorption of CO2 is more spontaneous than CH4 with strong affinity at high temperatures. This work confirm that CO2 is viable candidate to shale gas enhanced gas recovery and Qusaiba shale can store huge amounts of CO2 especially at high temperatures.
The simulation of the gas flow in tight sandstone reservoir is a very complicated process. Several mechanisms contributed to the natural gas production in tight sandstone reservoirs. One of the main mechanisms is the gas desorption from the rock surface to the pore body. All the existing models did not consider the effect of CO2 content in the natural gas on the gas desorption from the rock surface. Also all the existing models used desorption models from the literature and they neglect the effect of rock type and reservoir conditions on the gas desorption behavior. In this study and for the first time we will investigate the effect of CO2 content (0 to 20 vol%) on the natural gas desorption from the tight sandstone rocks. Accurate desorption isotherm will be developed based on the rock type and gas composition. Adsorption/desorption experiments will be carried out at different pressures and temperatures to develop a robust model for the natural gas desorption from the rock. Also the effect of tight sandstone rock mineralogy was investigated on the adsorption/desorption of the natural gas. Increasing CO2 fraction in the mixture from 0% to 10% CO2 the total gas uptake is increased to approximately 28%, 22% and 33% at 50°C, 100°C and 150°C respectively which reflects the high affinity toward CO2 from the tight sandstone core. The tight sandstone mineralogy also affected the desorption behavior of the natural gas. The presence of water bearing clay minerals such as illite exhibited a vast sensitivity to temperature causing damage to crystal structure and expulsion of bounded water which resulted in huge increase in the adsorption uptake. The results of the experimental studies showed that the CO2 content in the natural gas has a big effect on the desorption of the natural gas from the tight sandstone rocks. The CO2 content also affected the desorption isotherm model for the natural gas. The tight sandstone mineralogy also affected the desorption behavior of the natural gas. The output from this study is a robust model that explain the contribution of the desorption of the natural gas to the total gas production. Also, it will enhance the simulation and flow models that describe the flow of natural gas in porous media in tight sandstone reservoirs.