16 October 2023 in Microelectronics Journal
17 November 2020 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
This study presents a technique for designing a multimode configurable weak physically unclonable function (PUF) for security-key generation. The PUF cell is based on the maximum gain point deviations of bias-voltage-controlled inverters. By implementing a preselection strategy, the proposed PUF can simultaneously expose all unstable cells under normal voltage and temperature. Owing to the configurable bias circuit, the PUF cell can be biased at three operating modes, namely, traditional inverter (INV), current-starved inverter (CSI), and power gating (PG). The measurement results from a 65-nm prototype show that the proposed PUF has the following outstanding features: 1) it has a compact cell layout with a minimum feature size of 966 F2; 2) an autocorrelation function of 0.0099 is achieved; and 3) all unstable cells can be eliminated using a preselection procedure, which can drastically reduce the energy and area costs for error correction. In addition, in the CSI mode, the proposed PUF (standard voltage) has maximum frequency and throughput of 714 MHz and 45.7 Gb/s, respectively. Meanwhile, under the INV mode, the worst native bit error rate (low voltage) for 5000 evaluations is only 0.33%, indicating a desirable instability against voltage and temperature variations with a sensitivity coefficient of 1.85%/V and 0.018%/°C, respectively. Moreover, the measured energy efficiency at 0.6 V is 6.83 fJ/bit. Finally, under the PG mode, the standby powers at 0.6 and 1.2 V are only 18 and 86 nW, respectively.
9 October 2024 in Microelectronics Journal
30 July 2025 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Physically unclonable functions (PUFs) have significant potential in the field of information security applications. To reduce the area of PUF cells and improve the utilization of the PUF entropy source, a dynamic division multiplexing bistable PUF with independent output response is proposed. Initially, a bistable PUF model is constructed by dividing traditional cross-coupled bistable PUF cells. The pull-up (pull-down) network employs large transistor sizes to minimize process variations, while the pull-down (pull-up) network, as the main PUF entropy source, utilizes the minimum transistor size to maximize random process variations. Subsequently, a cross-coupled twin cell with a symmetrical structure and shared word lines is designed, and a PUF cell array is composed of n twin cells. Finally, the PUF cell array is dynamically configured using the output signal from a decoder. In this configuration, a single selected cell (with large deviation) and $n-1$ unselected cells connected in parallel (with negligible deviation) collectively form a bistable PUF circuit for dynamic division multiplexing. The proposed PUF can operate in two independent modes, each of which can generate a 2304-bit feature key. The design is fully customized using the Taiwan Semiconductor Manufacturing Company (TSMC) 65-nm process, and the area (feature size) of a twin cell is only $1.32~\mu $ m2 (308 F 2 ). Chip test results demonstrated that the proposed PUF achieved the entropy of 0.9999 (0.9997), the uniqueness of 49.9% (49.7%), and the reliability of 99.1% (97.7%) in the Ncell PUF (NC-PUF) [Pcell PUF (PC-PUF)] mode, respectively.
3 November 2025 in Microelectronics Journal