18 June 2024 in IEEE Electron Device Letters
We present a practical design concept to reduce the noise of Ge-on-Si single photon avalanche diodes to improve temperature operation. In this letter, three different values of barrier height design have been investigated, and all devices exhibit ultra-low leakage current (<10 pA) and low noise-equivalent power (<10 fWHz -1/2 ). A high photon detection efficiency of 24.7 % and effective suppression of the dark count rate enable photon response at high temperatures up to 330 K with low and high barrier height designs, respectively. With our proposed structure design, the initial progress made by Ge-on-Si SPADs in overcoming challenges associated with low temperatures is underscored, emphasizing its potential in light detection and ranging applications across ambient and elevated temperatures.
8 November 2017 in IEEE Transactions on Electron Devices
In this paper, a 1.1- $\mu \text{m}$ -pitch 33-Mpixel 240-fps backside-illuminated 3-D-stacked CMOS image sensor with three-stage cyclic-cyclic-successive-approximation-register (SAR) analog-to-digital converters (ADCs) is developed. The narrow-pitch interconnection technology that connects the pixels and arrayed ADCs inside the pixel area is described. The 3-D-stacked architecture, constructed using the interconnection technology, makes it possible to place a $\textsf {1932} ~{(}\textsf {H}{)} \times \textsf {4}~ {(}\textsf {V}{)}$ correlated-double-sampling/ADC array underneath the pixel area. Furthermore, the pipelined and parallel operation of the three-stage cyclic-cyclic-SAR ADC architecture effectively reduces the conversion time period and power consumption and achieves 12-b precision within one horizontal scan time of $0.92~\mu \text{s}$ . As a result, the interconnection technology and ADC architecture achieved a high frame rate of 240 fps in 33 Mpixels. Random noise of 3.6 $\text{e}^{-}$ and low power consumption of 3.0 W were attained at an extremely high pixel rate of 7.96 Gpixel/s. A good figure of merit is achieved compared with recently developed image sensors.
1 December 2025 in APL Photonics
This Letter presents a novel on-chip afterpulsing characterization method demonstrated using gated-mode short-wave infrared single photon avalanche diode arrays, effectively overcoming the measurement limitations of conventional methods. Through this approach, we first achieve a comprehensive evaluation of the full-chip afterpulsing effect by adjusting the ratio between gated-on time and gated-off time and employing a sampling window technique. Experimentally validated using a room-temperature-operated 160 × 116 Ge-on-Si single photon avalanche diode array, the approach clearly reveals the potential pixel-to-pixel variations in afterpulsing behavior across SWIR single-photon avalanche diode arrays, highlighting the critical importance of full-chip evaluation for designing and optimizing gating period.