3 July 2019 in Journal of Structural Integrity and Maintenance
This paper illustrates the usage of crumb rubber as a recycled aggregate in concrete. However, the presence of crumb rubber leads to a lower concrete compressive strength primarily due to its much lower stiffness. Under stress, the rubber deforms, re-distributing the load to the cement paste, which subsequently fails prematurely. Instead of reverting to conventional methods of increasing concrete compressive strength, such as lowering the water cement ratio facilitated through the addition of a superplasticiser or enhancing the binder effectiveness with the addition of silica fume, this paper will focus on some of the pre-treatment methods on crumb rubber that can help mitigate this loss of strength. These include accelerated aging and stiffening crumb rubber through exposing it to ultraviolet light to enhance its surface roughness characteristics or pre-treating crumb rubber by soaking it in sulphuric acid to develop a stiffer surface layer. By increasing the rubber’s stiffness, it is observed that its load share increases, thereby improving the crumb rubber concrete’s compressive strength and allowing a larger dosage replacement of normal aggregate without significant strength loss. In summary, identifying whether or not different pre-treatment of the crumb rubber aggregates are successful in avoiding a substantial loss in strength consequent upon its inclusion in concrete is the primary objective of this paper.
9 August 2024 in Recent Progress in Materials
This paper describes a method to use solely recycled and by-product materials as constituents to form concrete that can be used in buildings structural applications. As concrete is one of the most important materials in human civilization, where it is used widely in construction, cement and aggregate the main components of concrete cause an emission of large amounts of carbon dioxide, which is the main cause of global warming. The production of one tonne of cement, for example, causes the emission of about 800 kg of this CO2. The growing demand for concrete constitutes a threat to the environment and its resources into the future. According to a market study by The Freedonia Group, in 2019 the world demand for cement was 5.1 billion tonnes which means that more than 2.5 billion tonnes of water and more than 11 billion tonnes of aggregates, both of which are scarce resources, will also be consumed. The goal of this Paper is to describe a 100% substitution of concretes normal constituents to form a sustainable concrete with zero carbon footprint and without compromising concrete mechanical properties. This will demand a pre-treatment of the recycled and by-products components to compensate for the natural strength loss due to their inclusion. Therefore, an innovative novel treatment method is selected for recycled concrete aggregates and chipped rubber to be separately treated and tested to mitigate the loss of strength in proposing a novel recycled activator for GGBS and silica fume. Then these waste recyclable materials are combined in a concrete mix that is 100% recycled and, therefore, significantly more sustainable.