29 October 2020 in IEEE Transactions on Nanotechnology
In this work, a compact current-voltage (I-V) model is proposed for 2-dimensional transition metal dichalcogenides (TMDs) ambipolar field-effect transistors (ambipolar FETs). Charge control method was used to derive the I-V model. Impurity dopant, interface traps and dependence of carrier mobility on gate voltage are considered in the model. The compact I-V model is based on semiconductor device physics. I-V characteristics of TMD ambipolar FETs predicted by the compact model agree well with those obtained by 2-dimensional numeric simulator and no fitting parameter is needed. In addition, I-V characteristics and carrier area density calculated by the compact model are compared with experimental data published elsewhere. And the result derived from the compact model is consistent with the experimental data published. The compact I-V model provides a tool to evaluate the performance of TMD ambipolar FETs and integrated circuits based on these devices.
20 September 2018 in IEEE Transactions on Power Electronics
The SiC Bipolar Junction Transistor (BJT) offers an attractive alternative to the more popular SiC MOSFET. It is important to develop an accurate SPICE model for the SiC BJT to enable its use in power electronics applications. The current gain of a SiC BJT may degrade considerably at high current level and/or high temperature largely due to the surface recombination effect. In this paper, an improved SPICE behavioral model that accurately accounts for current gain dependent on collector current and junction temperature is proposed for the SiC BJT. We extend the conventional Gummel-Poon model in this work to include this important physical effect by adding a diode between the external base and emitter terminals of the BJT. A two-step model parameter extraction method is developed. We first extract the basic Gummel-Poon model parameters from low-current measurement data, and then extract the new surface recombination model parameters by observing the difference between the measured high-level base current and the standard Gummel-Poon model prediction. The simulated static and switching characteristics of the new SiC BJT model match with the measured data very well. Finally, the new SPICE model is used in the performance assessment of a proportional base driver technique embedded in a 3.6kW boost converter, demonstrating its validity in helping optimum design of power electronics applications based on SiC BJTs.
23 July 2024 in IEEE Sensors Journal
The fusion of millimeter-wave radar and camera sensors is crucial for tracking, positioning, and path planning in autonomous driving systems. Millimeter-wave radar offers relatively high distance resolution but lacks azimuth resolution. On the other hand, stereo cameras provide accurate azimuth measurements and high target detection rates, however, they struggle with estimating target distances. To address this problem, this paper proposes a fusion system that combines millimeter-wave radar and stereo cameras. The fusion system leverages spatiotemporal calibration techniques to process data from radar and stereo cameras, enabling effective target matching. The proposed fusion system leverages the matched longitudinal position of the target obtained from the millimeter-wave radar to infer the target’s position data under the stereo camera. Subsequently, an improved evidence decision distance adaptive filtering method is proposed in this study, and the position data of millimeter-wave radar and stereo camera are fused using common mean filtering and optimal weighted filtering methods, effectively improving the lateral positioning accuracy of the target. Statistical experimental results show that compared with the root mean square error (RMSE) of lateral positioning measurements by millimeter-wave radar, the mean filtering and optimal weighted filtering reduced the lateral positioning measurement RMSE by 31.9% and 32.9% respectively. The lateral positioning RMSE of the proposed filtering method decreased by 35.2%. The fusion method is promising for accurate object positioning.
1 August 2023 in IEEE Sensors Journal
Polymeric insulator is key to safe operation of the whole power transmission system. With the purpose of realizing accurate detection of defects in polymeric insulation core rod, a multi-angular microwave diagnostic system for defects detection is proposed. The microwave detection system is based on the wave impedance theory, and utilizes the difference of S (scattering) parameters to distinguish defects. Firstly, simulation investigation is presented regarding the millimeter-scale defects of different size. The Frobenius norm difference between the defective mandrel and the intact mandrel can be observed visibly in the high frequency range. Then, an experimental setup is designed and manufactured to verify the simulations. The measurement results display significant Frobenius norm difference between the defective mandrel and the intact mandrel over 2.5-6 GHz. Finally, the proposed method is employed to distinguish several types of defects with different physical properties, in terms of permeability and dielectric constant. The nondestructive microwave diagnostic method is based on multi-angular transmission signal and can reliably identify defects of millimeter scale by introduction of Frobenius norm analysis. It is promising for detection of defects in polymeric insulators as well as other nonconstructive materials.
17 July 2025 in Journal of Food Process Engineering
25 February 2025 in Sensors and Actuators A: Physical