The paper presents essential static and dynamic properties characterizing resilient mats for vibration isolation of railway tracks. The attention was focused on under-ballast mats and slab-track mats used in the construction of railways. Referring to this type of mats, selected test procedures for determining the values of parameters describing static and dynamic characteristics were described. Basic classification of vibration isolation mats was presented in the paper. Moreover, the essential functional and operation features related to various types of mats were given. Some theoretical aspects concerning viscoelastic dynamic modelling of resilient track elements were also outlined. In order to characterize requirements and methodology of research for resilient mats in railway tracks, German Standards [1–3] were used herein
The paper describes the essential functional and operational features of the Under Sleeper Pads (USPs), used in ballasted rail track systems. The overview of appropriate test methods for determining the values of relevant parameters for the purposes of using vibro-acoustic isolators was presented, with special attention drown to the changes resulting from the introduction of the PN-EN 16730 standard in this field. Due to the given testing procedures for USPs, selected examples of the normative testing methods of the USPs’ carried out at the Faculty of Civil Engineering of the Warsaw University of Technology with the results were presented.
1 January 2017 in Archiwum Instytutu Inżynierii Lądowej
The paper presents laboratory methods of testing the prototype resilient mats, used in rail track systems in order to reduce vibrations transmitted to the vicinity of the railroad and to improve the resistance of the railroad structure. The laboratory testing program was carried out for elastomeric materials (polyurethane based). The key parameters being investigated in the Warsaw University of Technology laboratory unit were used in order to determine the insertion loss vibration level by applying analytical method. The paper presents the influence of selected parameters i.e. static and dynamic moduli on the reduction of vibration and structure-borne sound level – i.e. the value of insertion loss parameters.