15 February 2022 in IEEE Access
Nowadays, power quality under the excessive implementation of power electronics devices is quite challenging issue. The compensation of non-sinusoidal; reactive and harmonic; components is the main role for power quality devices which highly depend on the robustness of the control system. Some common control systems are implemented using Synchronous Stationary Frame (DQ) theory. This paper proposes a new version of DQ control technique to control dynamic voltage restorer under severe transient voltage conditions. The power system network with the new DQ control technique is studied and analyzed under different scenarios to compensate for severe balanced and unbalanced voltage sags and swells. This new scheme is based on extraction of positive sequence components to implement the control algorithm. A mathematical model of the dynamic voltage restorer (DVR), hysteresis voltage control, converter controller model, new DQ scheme with complete system equations are carried out and verified using Simulink / MATLAB. The proposed system is validated experimentally using DSpace 1104 based laboratory system. The obtained results of the proposed compensation algorithm are compared with the results obtained from the traditional DQ method. Simulation and experimental results are correlated and show effectiveness of the proposed DQ control scheme.
7 June 2020 in Engineering, Technology & Applied Science Research
The subject of power quality is gaining much interest nowadays. With the sophisticated sensitive electrical devices available in the market, power stations should ensure qualified and eminent power to the point of utilization. Bad voltage conditions in a power system can cause a malfunction at the point of utilization. Dynamic voltage restorer (DVR) is a reliable power electronic offsetting device which when engaged in the power system is effectual in the operation of compensating voltage sag/swell. In this research work, a DVR for offsetting multiple voltage disturbances in a power system is presented and a novel control strategy to trigger power switches in DVR is proposed. The proposed novel control methodology is compared with Synchronous Reference Frame (SRF) theory-controlled DVR. The simulation model is designed and the analysis with MATLAB/SIMULINK is presented
27 April 2018 in European Journal of Electrical Engineering
Simulation de convertisseur de matrice buck boost monophasé sans problèmes de commutation Simulation of single phase buck boost matrix converter without commutation issues
1 December 2022 in Indonesian Journal of Electrical Engineering and Computer Science
This work proposes a 2-degree-of-freedom proportional-integral-double-derivative (2-DOF PIDD) controller to improve frequency profiles of an IEEE 39 bus 10 generator 3 area New England interconnected power system during step load perturbations. To increase the system’s dynamic response, parallel derivative components are used in the secondary controller mechanism, and comparisons are made with proportional, integral and derivative (PID) and 2-DOF PID controllers to illustrate the advantage of the proposed controller scheme. The ideal gain values of the PID, 2-DOF PID, and 2-DOF PIDD controllers are achieved using a novel evolutionary algorithm called the intelligent water drops (IWD) algorithm, which is used for the first time for the load frequency control problem for a 3-area power system. The results proved that the proposed controller is superior to the existing controllers. Simulations are done in the MATLAB-Simulink® environment.
27 August 2018 in European Journal of Electrical Engineering
Onduleur de poussée mono-étage avec technique de modulation à basse commutation Single stage boost inverter with low switching modulation technique