22 January 2019 in Eastern-European Journal of Enterprise Technologies
Features of the estimation of the intensity of heat exchange in self-ventilated disk-shoe brakes of vehicles
9 April 2026 in Problems of Friction and Wear
Theoretical research and a computational experiment dedicated to optimal control of thermal processes in friction pairs during frictional interaction in braking devices have allowed us to establish and propose the following. Thermal process control is accomplished mathematically using the heat equation with initial and boundary conditions, employing a control function, as well as the method of thermoelastic potentials and moving local heat sources in brake friction pairs. Material selection based on the mechanical properties of drill drawworks brake pulleys was conducted using a computational experiment. Based on the research conducted, a discovery formula was formulated: "Unknown patterns of microcrack occurrence and development on the working surfaces of metal friction brake elements have been established."
30 May 2026 in Engineering
The materials of the article consider the optimization design of friction pairs of a chamber-type disc-shoe brake taking into account the restrictions on the design and operational parameters. The design and operation of a chamber disc-shoe brake of a drilling winch are presented, with a brake disk consisting of two half-disks of variable thickness, the larger of which corresponds to the maximum radius of the friction zone, and the smaller one to its minimum radius. As a heat carrier in the disk chamber in the cooling system, low-melting Li in the form of a powder mixed with water was used. Using the force method, the inertia forces, radial and tangential forces acting on the chamber disk and nanofluid in the volume of the chamber were determined. The stress-strain state of the disk was simulated to study mechanical and thermal stresses using the Ansys Workbench program. The values of the maximum equivalent stresses and stress gradients along the thickness of the chamber disk were determined and analyzed. The efficiency of nanofluid cooling was assessed using the thermal balance of the chamber disk. The thermal balance was assessed during forced air and forced nanofluid cooling of a metal friction element. Experimental and design developments, theoretical studies, and a full-scale computational experiment on a new type of chamber disc-pad brake with nanofluid cooling allowed us to establish the regularities of changes in operational parameters in the form of graphical dependencies. The main operational and heat exchange parameters of the serial and developed disc-pad brake of a drilling winch were compared. The wear and friction properties of friction pairs were improved by operating the brake in a temperature range lower than that permissible for the friction lining material, and, as a result, the braking qualities for the lifting shaft of the drilling rig.
31 May 2026 in Problems of Friction and Wear
Theoretical and experimental studies of the thermal stability of materials and fluctuations in the friction pair parameters of lifting and transport equipment brakes have revealed the following. The working layers of the lining and the metal friction element are located at different charge poles, but their roles are different: the former act as charge accumulators and undergo profound tribokinetic changes, while the latter act as entropic energy accumulators, i.e., as a battery. Stressful conditions for entropic energy flows include steady-state and thermal stabilization temperatures, as well as the destruction of the surface layers of friction lining materials. Entropy changes related to fluctuations in the friction pair parameters of operating brake devices. Based on the calculated dependence obtained, 3D graphical patterns were constructed to determine the linear wear of the lining for the values of the impulse normal forces, friction path, lining working area, and the hardness of its materials.
3 April 2025 in Problems of Friction and Wear
У матеріалах статті показано, що на підставі багатофакторного аналізу запропоновані моделі нанорідин, які враховують у базових рідинах: зіткнення між: наночастинками та молекулами; наночастинками, що обумовлені броунівським рухом; теплову дифузію наночастинок та їх взаємодію з молекулами; утворення траєкторій перколяції з низьким теплоємним опором у рідині; вплив: міжфазного та приграничного шарів при розділі твердої та рідкої фаз; ефекту поверхневих оболонок; тонких наношарів; кластеризації частинок. Дослідження нанорідин зводиться до визначення їхнього коефіцієнта теплопровідності. При оцінці дифузії в системах, що обертаються, з нанорідиною враховували сили, різні потоки, швидкості руху, градієнти, питомі об’єми, седиментацію, виникаючі коефіцієнти, руомість наночастинок рідини в камері. Розглянуто взаємодію наночастинок в рідинних системах охолодження, а також оцінені нанорідинні потоки в умовах теплообміну в камері системи охолодження обода шківа.
29 May 2026 in Automobile Transport
Problem. Theoretical and experimental studies of the dynamic and thermal loading of friction pairs of brake devices from the point of view of assessing the stability and stability of their operating parameters allowed us to propose the following. The efficiency of the friction unit of band-pad brakes by stabilizing the load of the friction unit based on modeling its stress-strain state and wear in the modes of lowering the drill string and drilling, as well as substantiation of methods for calculating the design and operational parameters of friction pairs of brakes. However, nothing was said about the local problem of stabilizing the operating parameters of friction pairs of brakes. Goal. The purpose of the development is to substantiate the method of generalizing the operating parameters of brake friction pairs for preliminary prediction of fluctuations in their stabilization and stability values. Methodology. Analytical methods were used to study the dynamic and energy load of friction pairs in disc-pad brakes. The efficiency of the brakes and the stabilization of their operating parameters were determined. Results. Based on the elements of the theory of thermal similarity, a method of basic generalized parameters of friction pairs is proposed, relating to their average, maximum and minimum values regarding their stabilization, oscillations and stability, a clear sequence and relationship of the operating parameters of friction pairs of braking devices is determined, temperature gradients of metal friction elements are estimated and their permissible values for calculating heating and forced cooling rates are determined. Originality. The proposed method of generalized operating parameters of brake friction pairs allows predicting them and establishing their oscillations, stability, and elasticity. Practical value. Using this method will increase the efficiency of friction pairs of disc-pad brake devices, as well as improve their wear resistance and frictional properties during cyclic braking