4 February 2020 in Light: Science & Applications
Direct femtosecond (fs) laser processing is a maskless fabrication technique that can effectively modify the optical, electrical, mechanical, and tribological properties of materials for a wide range of potential applications. However, the eventual implementation of fs-laser-treated surfaces in actual devices remains challenging because it is difficult to precisely control the surface properties. Previous studies of the morphological control of fs-laser-processed surfaces mostly focused on enhancing the uniformity of periodic microstructures. Here, guided by the plasmon hybridisation model, we control the morphology of surface nanostructures to obtain more control over spectral light absorption. We experimentally demonstrate spectral control of a variety of metals [copper (Cu), aluminium (Al), steel and tungsten (W)], resulting in the creation of broadband light absorbers and selective solar absorbers (SSAs). For the first time, we demonstrate that fs-laser-produced surfaces can be used as high-temperature SSAs. We show that a tungsten selective solar absorber (W-SSA) exhibits excellent performance as a high-temperature solar receiver. When integrated into a solar thermoelectric generation (TEG) device, W-SSA provides a 130% increase in solar TEG efficiency compared to untreated W, which is commonly used as an intrinsic selective light absorber.
1 February 2013 in Review of Scientific Instruments
We have designed and characterized micro-electro-mechanical systems (MEMS) for applications at low temperatures. The mechanical resonators were fabricated using a surface micromachining process. The devices consist of a pair of parallel plates with a well defined gap. The top plate can be actuated for shear motion relative to the bottom fixed plate through a set of comb-drive electrodes. Details on the operation and fabrication of the devices are discussed. The geometry was chosen to study the transport properties of the fluid entrained in the gap. An atomic force microscopy study was performed in order to characterize the surface. A full characterization of their resonance properties in air and at room temperature was conducted as a function of pressure, from 10 mTorr to 760 Torr, ranging from a highly rarefied gas to a hydrodynamic regime. We demonstrate the operation of our resonator at low temperatures immersed in superfluid 4He and in the normal and superfluid states of 3He down to 0.3 mK. These MEMS oscillators show potential for use in a wide range of low temperature experiments, in particular, to probe novel phenomena in quantum fluids.
23 August 2012 in Journal of Low Temperature Physics
7 February 2019 in Optical Materials Express
Femtosecond laser ablation of materials can alter their optical, chemical, electrical, and mechanical properties. It has been previously shown that ablated metals can be simultaneously black and superhydrophobic. In this work, we demonstrate a variety of colored superhydrophobic metals. By raster scanning the surface of copper and overlapping a portion of the irradiated area, we create two distinct and geometrically separated nanostructured regions, one forming color, the other inducing superhydrophobicity. Colors forming along the trough of the raster-scanned lines are formed by nanoparticle-induced plasmonic absorption and result in a range of colors from purple to red, depending on the raster scanning speed of the laser. The edges of the raster-scannedarea, having been doubly irradiated, form large hierarchical micro/nanostructures which induce superhydrophobicity. Contact angle measurements, spectral examination, and nanoparticle analysis enable us to fully characterize and understand these structures and how they result in dual functionality colored superhydrophobic surfaces.
20 October 2010 in Journal of Low Temperature Physics
1 July 2019 in Advanced Materials Interfaces