The maximum reach of the Dense Wavelength-Division-Multiplexed Passive Optical Network (DWDM-PON) system can be severely limited by chromatic dispersion (CD). This paper contains the investigation of long-reach high speed 16-channel DWDM-PON system with efficient CD compensation methods. It is shown that chromatic dispersion compensation has a crucial role for guaranteed downstream optical link performance and maximum link length of high speed long-reach DWDM-PON system. The results show that usage of additional 7 km long dispersion compensating fiber (DCF) placed in central office improves the DWDM-PON network reach by 19.3% (from 57 km up to 68 km) but usage of fiber Bragg grating (FBG) improves network reach up to 26.3% (from 57 km up to 72 km). As a result, authors recommend the use of FBG for chromatic dispersion compensation to increase the maximum transmission distance of high speed DWDM-PON system.
This paper contains the investigation of 8-channel wavelength-division-multiplexed passive optical network by using spectrum-sliced amplified spontaneous emission (ASE) source as a seed light with arrayed-waveguide gratings (AWGs). There are investigated the impact of signal filtering for Gaussian and Flat-top type AWGs on the overall optical system's performance. It is shown that Gaussian type AWG's with channel interval 100 GHz are not suitable for SS-WDM PON systems with high data rate - 2.5 Gbit/s because of wide spectral shape and high channel crosstalk. Numerically it is proved that best solution for 8 channel SS-WDM PON system which provides high performance over the passive fiber optical link length up to 10 km with BER <; 1·10 -10 are AWG's with Flat-top spectral shape. It has been investigated that Flat-top AWG unit shows high OSNR because of its amplitude transfer function that provides excellent channel separation and filtering at the same time passing sufficient high optical power from spectrally sliced ASE broadband light source.
1 June 2013 in Latvian Journal of Physics and Technical Sciences
The increased demand of mobile broadband consumers on services in the mobile environment with high data rate and technologically developed mobile broadband communication systems will require more spectrum to be available in the future. The new technologies as well as the existing services require frequencies for their development. The authors investigate the available and potential future mobile terrestrial frequency bands - worldwide and in Europe. An insight into the spectrum management is provided, with radio access technologies, methods for more efficient use of mobile frequency bands and frequency cross-border coordination also addressed. It is stressed that the radio frequency spectrum is a limited national resource that will become increasingly precious in the future.
Mixed-Line Rate (MLR) is a cost efficient solution to cope with the rapidly increasing and heterogeneous Internet traffic. In a MLR-based scenario wavelength channels are organized in groups (i.e., sub-bands), each of which consisting of channels operating at the same rate, e.g., it is possible to have on the same fiber link subbands operating at 10 Gbps, 40 Gbps, and 100 Gbps. In order to increase spectral efficiency one can reduce not only the channel spacing within a sub-band but also the frequency spacing between sub-bands operating at different rates, i.e., the sub-band spacing. On the other hand smaller sub-band spacing may: (i) negatively impact the transparent optical reach of wavelength channels due to the higher inter-channel crosstalk levels, and consequently (ii) increase the network power consumption because of the need of more signal regeneration. This paper aims at assessing the trade-off between spectral efficiency and the power consumption in a WDM transport network, when a certain quality of transmission needs to be guaranteed at the receiving node. This is accomplished by evaluating a number of spectral efficient MLR solutions, where the number of wavelength channels allocated to each sub-band is varied while keeping the required Bit Error Rate (BER) level at the receiving node fixed. Results show that the width of each sub-band plays a central role in determining the power consumption of an end-to-end connection.
19 September 2011 in Elektronika ir Elektrotechnika
Chromatic dispersion (CD) has a significant impact on a quality of transmitted optical signal in high-speed fiber optic communication systems with data rates up to 10 Gbit/s, and as a result CD limits the maximum length of transmission distance. In order to operate fiber optic communication system with a sufficiently low bit error ratio (BER) and minimize the performance degradation caused by pulse distortion and broadening, dispersion compensation is needed. In this work using OptSim simulation software we realize an experimental high-speed WDM fiber optic communication system model with a new combined dispersion compensation mechanism where a conventional dispersion-compensating fiber (DCF), fiber Bragg grating (FBG) or optical phase conjugator (OPC) are used together. The best results were obtained by using FBG-OPC dispersion compensation scheme which showed the lowest BER value. Basis of the results we recommend avoiding the use of DCF for CD compensation where it is possible and use FBG instead. Ill. 15, bibl. 9 (in English; abstracts in English and Lithuanian). http://dx.doi.org/10.5755/j01.eee.113.7.622