10 March 2022 in IEEE Open Journal of the Communications Society
PTPanagiotis Theofanopoulos
Panagiotis Theofanopoulos
+4
Reconfigurable intelligent surfaces (RISs) have promising coverage and data-rate gains for wireless communication systems in 5G and beyond. Prior work has mainly focused on analyzing the performance of these surfaces using simulations or lab-level prototypes. To draw accurate insights about the actual performance of these systems, this paper develops an RIS proof-of-concept prototype and extensively evaluates its potential gains in the field under realistic wireless communication settings. In particular, a 160-element RIS, operating at a 5.8 GHz band, is designed, fabricated, and accurately measured in the anechoic chamber. This surface is then integrated into a wireless communication system and the beamforming gains, pathloss, and coverage improvements are evaluated in realistic outdoor communication scenarios. When both the transmitter and receiver employ directional antennas, the developed RIS achieves 15-20 dB gain in the signal-to-noise ratio (SNR) in a range of ±60∘ beamforming angles. In terms of coverage, and considering a far-field experiment with a blockage between a basestation and a grid of mobile users and with an average signal path of 35 m, the RIS provides an average SNR improvement of 6 dB (max 8 dB) within an area >75 m. Thanks to the scalable RIS design, these SNR gains can be directly increased with larger RIS areas. For example, a single 1,600-element RIS with the same design is expected to provide 26 dB SNR gain for a similar deployment (theoretical estimation). These results draw useful insights into the design and performance of RIS systems and provide an important proof for their potential gains in real-world far-field wireless communication environments.
30 October 2018 in IEEE Transactions on Antennas and Propagation
A technique to synthesize a new category of Radar Cross Section (RCS)-reduction metasurfaces is presented. The appealing feature of the proposed technique is that by representing the generalized Snell-Descartes’ law of reflection in the form of array factor, it unifies the two most widely studied and well established modern RCS-reduction methods: checkerboard metasurfaces (CMS) and gradient index metasurfaces (GIMS). More importantly, it refines the concepts of both of these metasurfaces and overcomes numerous limitations associated with them. It can synthesize the RCS-reduction metasurfaces which can be placed along with almost any existing metasurface, without replacing the original metasurface that may be designed to serve a specific purpose, to reduce its RCS. The proposed technique is fundamentally based on scattering cancellation, and it is validated using artificial magnetic conductor (AMC) technology for several configurations. Moreover, a phasor representation is developed and implemented for complex configurations to make the synthesis simpler and more insightful. Finally, to display the versatility of the proposed technique, an example of RCSreduction metasurface has been synthesized and introduced to an existing high-gain metasurface ground plane available in the literature. This paper is confined to the conventional specular direction.