Hussein N Shaman

Prof. Dr. Hussein N Shaman

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 July 2017 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
AMAnuj Y. Modi
Anuj Y. Modi
CBConstantine Balanis
Constantine Balanis
CBCraig R. Birtcher
Craig R. Birtcher
HSHussein N Shaman
Hussein N Shaman
A novel technique for designing ultrabroadband radar cross section (RCS) reduction surfaces using artificial magnetic conductors (AMCs) is proposed in this paper. This technique overcomes the fundamental limitation of the conventional checkerboard design where the reflection phase difference of (180±37)° is required to achieve 10-dB RCS reduction. Initially, a planar surface for broadband RCS reduction is designed with two properly selected AMCs in a blended checkerboard architecture. A 10-dB RCS reduction is observed for more than 83% of the bandwidth (3.9-9.45 GHz) with this blended checkerboard design. After modifying the blended checkerboard design using the proposed novel technique, the 10-dB RCS reduction bandwidth increased to 91% fractional bandwidth (3.75-10 GHz) as the criteria of (180 ± 37)° reflection phase difference is no longer required. Measured data show an excellent agreement between the predicted, simulated, and measured data. Bistatic performance of the surface at various frequencies is also presented. Key steps for designing ultrabroadband RCS reduction checkerboard surface are summarized.

30 October 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
AMAnuj Y. Modi
Anuj Y. Modi
CBConstantine Balanis
Constantine Balanis
CBCraig R. Birtcher
Craig R. Birtcher
HSHussein N Shaman
Hussein N Shaman
A technique to synthesize a new category of Radar Cross Section (RCS)-reduction metasurfaces is presented. The appealing feature of the proposed technique is that by representing the generalized Snell-Descartes’ law of reflection in the form of array factor, it unifies the two most widely studied and well established modern RCS-reduction methods: checkerboard metasurfaces (CMS) and gradient index metasurfaces (GIMS). More importantly, it refines the concepts of both of these metasurfaces and overcomes numerous limitations associated with them. It can synthesize the RCS-reduction metasurfaces which can be placed along with almost any existing metasurface, without replacing the original metasurface that may be designed to serve a specific purpose, to reduce its RCS. The proposed technique is fundamentally based on scattering cancellation, and it is validated using artificial magnetic conductor (AMC) technology for several configurations. Moreover, a phasor representation is developed and implemented for complex configurations to make the synthesis simpler and more insightful. Finally, to display the versatility of the proposed technique, an example of RCSreduction metasurface has been synthesized and introduced to an existing high-gain metasurface ground plane available in the literature. This paper is confined to the conventional specular direction.

20 December 2018 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
SRSubramanian Ramalingam
Subramanian Ramalingam
CBConstantine Balanis
Constantine Balanis
CBCraig R. Birtcher
Craig R. Birtcher
HSHussein N Shaman
Hussein N Shaman

27 November 2017 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
SRSubramanian Ramalingam
Subramanian Ramalingam
CBConstantine Balanis
Constantine Balanis
CBCraig R. Birtcher
Craig R. Birtcher
SPSivaseetharaman Pandi
Sivaseetharaman Pandi
HSHussein N Shaman
Hussein N Shaman
This letter addresses the design and analysis of cylindrical one-dimensional leaky-wave antennas (LWAs) in which the surface impedance is modulated along the axis of the cylinder. The surface impedance modulation function for these LWAs is obtained using the holographic principle. The effect of the curvature for the radiation characteristics of the antenna are explained by projecting the curved aperture of the antenna onto a planar aperture. An analytical model is developed to predict the radiation characteristics of the antenna. The utilization of these antennas for automotive radar applications is examined in some detail. The effect of painting the antenna surface, and used as a cover, is predicted using a transmission line model.

9 June 2023 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
AMAditya Varma Muppala
Aditya Varma Muppala
AAAbdullah Alburadi
Abdullah Alburadi
ANAdib Y. Nashashibi
Adib Y. Nashashibi
HSHussein N Shaman
Hussein N Shaman
KSKamal Sarabandi
Kamal Sarabandi
A mechanically scanned high-resolution 2-D imaging radar system with full 360° Field-of-View (FoV) is presented. The system is composed of a multi-function 222-228 GHz frequency modulated continuous wave (FMCW) radar and a moment of inertia optimized 3-D printed offset reflector antenna. The reflector geometry is made from an Elliptic Toroidal surface which is shown to produce a high-gain fan-beam with an 11:1 aspect ratio. The reflector is rotated at speeds up to 10 Hz for high throughput imaging. The wobble generated by the high speed rotation is suppressed by optimizing the mass distribution of the reflector body. It is fabricated in-house using a low-cost table-top Fused Deposition Modelling (FDM) 3-D printer. The reflecting surface is metallized with a silver coated copper paint and processed using simple steps to ensure smoothness and accuracy. The reflector achieves beamwidths of 4.6° in elevation and 0.42° in azimuth, with a peak gain of 38.7 dBi. The 3 dB azimuthal resolution of the radar two-way beam is measured to be 0.3°. The system is tested in real-world scenarios and the resulting images and videos are of unprecedented quality due to the large area of coverage, high resolution, high speed and excellent dynamic range. To the best of our knowledge, this is the first demonstration of a compact radar system that is comparable in resolution, speed and angular coverage to lidars, while offering higher dynamic range and immunity to severe weather and lighting conditions.

5 November 2018 in IEEE Transactions on Intelligent Transportation Systems
Verified
Journal Article
Closed access
AAAbdulrahman A. Alaqeel
Abdulrahman A. Alaqeel
AIAmr A. Ibrahim
Amr A. Ibrahim
ANAdib Y. Nashashibi
Adib Y. Nashashibi
HSHussein N Shaman
Hussein N Shaman
KSKamal Sarabandi
Kamal Sarabandi
This paper proposes radar sensors operating at J-band (220-320 GHz) for automotive applications. Operating at J-band, at about three times higher frequency than the currently available automotive radars operating at 77 GHz, will result in three-fold improvement in cross-range resolution for the same antenna size. Since the characterization of the radar backscatter from different objects on the traffic scenes is necessary for optimizing the design of automotive sensors, the work reported in this paper is the start of a broader study that attempts to fill the lack of knowledge on radar backscatter behavior of road environment at this frequency band. Considering vehicles as the most important object for automotive radars, this paper investigates the response of vehicles from different aspects. A combination of outdoor high-resolution synthetic aperture radar imaging experiments and real-aperture imaging measurements of vehicles are performed using a 222-GHz polarimetric instrumentation radar. The aim of these experiments is to identify the scattering centers on different vehicle bodies and to determine the statistics of the radar return. The results show that significant scattering is due to a limited number of fixtures on the vehicle's outer surfaces facing the radar. The strongest scattering phase-centers observed are due to specular reflections and, hence, have a strong dependence on the relative look angle. The statistics associated with backscatter from vehicles are found, in most cases, to best fit the Weibull distribution.