4 October 2023 in Composite Structures
1 June 2012 in Journal of Performance of Constructed Facilities
To fulfill the navigation development plan of the Hu-Jia-Shen Channel located on the eastern coast of China, it is necessary to upgrade its width and clearance height. The Qifeng Bridge, an arch bridge over the channel, is required to be raised by 2.5 m using the integral lifting method. In this paper, the operation principles of the hydraulic jack system, the composition of the supporting structures, and the lifting process of the bridge are presented. To verify the proposed procedures adopted in this project, a 3-dimensional finite-element method (FEM) model, incorporating a bridge-capping beam of main span and a supporting girder, is established to analyze the contact behavior and stress distribution characteristics between the beam and supporting girder. The induced stresses in the superstructure and supporting structures are also monitored and analyzed.
1 February 2023 in Journal of Applied Mechanics and Technical Physics
The plastic instability of an internally impulsively loaded thin-walled end-closed cylindrical shell with plastic anisotropy is investigated. The cylindrical shell is assumed to be made of a ductile material. Based on Hill’s orthogonal anisotropic yield criterion, the instability strain of a thin-walled end-closed cylinder is derived, which takes into account the effects of the plastic orthotropy and strain rate. The numerical analysis of the instability strain is conducted. The results show that the instability strain for a thin-walled end-closed cylindrical shell depends upon the deviation from isotropic plasticity and the strain rate.