1 February 2009 in Energy Policy
6 May 2014 in IEEE Transactions on Energy Conversion
A permanent magnet reluctance generator (PMRG), which is a type of switched reluctance machine (SRM) with magnets on stator yoke, has an extremely simple and robust structure and is suitable for variable speed applications such as wind energy conversion systems (WECSs). A three-phase asymmetric half-bridge (AHB) converter with a torque ripple minimization-assisted maximum power point tracking (MPPT) algorithm presents an effective control for a PMRG-based WECSs, which allows suppressing torque ripples arising from the nature of the PMRG while capturing maximum power from the wind. However, a single package of the converter is not available in the markets and hence, its construction by a user suffers from higher cost and lower reliability. In order to overcome the drawbacks of the AHB converter, this research introduces, for the first time, the use of full-bridge (FB) converter to drive the PMRG-based WECS. The three-phase FB converters, which have widespread use in practice, are commercially available in the markets. The FB converter with torque ripple minimization-assisted MPPT algorithm has been successively employed in the PMRG driven WECS. Performance of the control-converter combination has been experimentally tested on the three-phase 6/4 PMRG.
1 January 2013 in Journal of Renewable and Sustainable Energy
A permanent magnet reluctance generator (PMRG), which is the member of switched reluctance machine (SRM) family, has an extremely simple and robust structure: no winding on both rotor and stator. Required flux for energy conversion is provided by magnets buried in stator yokes. Thus, it seems to be suitable for wind energy conversion systems (WECSs) for reducing power generation cost to the level of fossil energy conversion systems. In a PMRG based conventional WECS, the PMRG is often accompanied by a simple diode bridge and a maximum power point tracking (MPPT) controlled converter. This type of converter topology does not allow utilizing any torque ripple minimization strategy. Thus, the system inevitably suffers from large torque ripples due to the doubly salient structure of both stator and rotor of the PMRG. Torque ripples propagate acoustic noise, vibrations, and mechanical stress in the turbine-shaft. Exposing to such ripples may result serious failure or damage in the WECS. In this paper, a novel algorithm consisting of MPPT and torque ripple control has been tested on the PMRG based WECS. The control strategy is applied to the system through an asymmetric half bridge (AHB) converter which is accepted to be a traditional converter for SRMs. The performance of control method has been verified under the conditions of constant and variable wind speed. Both simulation and experiment results prove that the control algorithm with the AHB converter allows significant torque ripple reduction in PMRG based WECS while generating power at its maximum point.
1 January 2014 in IEEJ Journal of Industry Applications