This review examines state-of-the-art techniques to control the porosity of both activated carbons and zeolite templated carbons in order to fine-tune their ability towards the capture and storage of various gases under different pressure and temperature applications.
Activation of N-rich and O-poor carbonised matter from ionic liquids yields ultraporous carbon (4000 m2 g−1 and 3.3 cm3 g−1) with high packing density that translates to methane uptake of up to 0.53 g g−1 and 289 cm3 (STP) cm−3 at 25 °C and 100 bar.
The efforts to increase the active surface area of catalysts led to reduction of metal particle size, down to single metal atoms. This results in increasing importance of support–metal interactions. We demonstrate the mechanisms through which the support influences catalytic activity of nanoclusters: the support electronics, described by the O 2p energy level, and the support surface chemistry, determined by the density of Lewis base sites. Using Ru nanoclusters, our study shows that these parameters can be effectively captured within a single catalyst support descriptor (CSD). The apparent activation energy and turnover frequency (TOF) for the ammonia synthesis correlates strongly with CSD measured for the series Ru/MgO, Ru/Sc2O3, Ru/CeO2, Ru/La2O3, and Ru/Y2O3. Furthermore, the study demonstrates that CSD correlates linearly with the binding strength of N–Ru in nanocluster, thereby providing a direct link between the catalyst's surface chemistry and the nature of the support. The catalyst support descriptor developed in this study serves as a simple yet powerful tool for selecting the optimal support material to maximise the activity of metal nanoclusters without altering the metal itself.
Activated carbon cloth (ACC) has the potential to be extremely useful in gas capture and storage applications as it combines high porosity, robustness, and flexibility with ease of handling. While it has been produced by a few researchers, the synthesis methods used to date either do not yield a product with high porosity, or if appropriate textural properties are achieved the synthesis is complex and arduous. Following a systematic study, we show that an almost exclusively microporous flexible ACC can be achieved with surface area >1900 m2 g−1 via stabilisation with NH4Cl only, followed by activation with benign activating agent potassium oxalate (PO). After extensive optimisation and simplification of the process, it was found that the stabilisation step can be omitted in a synthesis route requiring only a simple carbonisation step to produce a flexible microporous carbon with surface area >2200 m2 g−1, thus further reducing the need for additional solvents and reagents. The CO2 and CH4 uptake of the ACCs developed in this work is comparable to that previously reported for flexible porous carbons prepared via more complicated routes and the porosity of the ACCs can be tuned to specific gas uptake applications according to the synthesis conditions.