21 April 2022 in European Journal of Materials
As a relatively young additive manufacturing technology, Electron Beam Powder Bed Fusion (EB-PBF) attracts increasing attention in academics and industry. Especially, the last five years have seen an explosion in machine and process development as well as material research for EB-PBF. Compared to other additive manufacturing approaches, e.g., the more widely used laser powder bed fusion, EB-PBF shows various unique features and advantages for processing high-performance metallic components. In this article, recent advancements in the realm of EB-PBF over the past five years are reviewed.
25 March 2018 in Advanced Engineering Materials
20 March 2017 in Rapid Prototyping Journal
Purpose: This study aims to achieve the fabrication of three-dimensional core-shell filament-based lattice structures by means of robocasting combined with co-extrusion. For core and shell materials, colloidal gels composed of submicron carbon and alumina powders were developed, respectively. Simultaneously, the co-extrusion process was also studied by numerical simulation to investigate the feed pressure-dependent wall thickness.Design/methodology/approach: Significant differences in the rheological behavior of the carbon and alumina gels were observed because of differences of the particle morphology and surface chemistry of the carbon and alumina powders. Precise control over the cross-sectional diameter of the core and shell green state elements was achieved by alteration of the feed pressures used during co-extrusion.Findings: After subsequent thermal treatment in an oxidizing atmosphere (e.g. air), in which the carbon core was oxidized and burned out, lattice structures formed of hollow filaments of predetermined wall thickness were manufactured; additionally, C-Al2O3core-shell filament lattice structures could be derived after firing in an argon atmosphere.Originality/value: Green lattice truss structures with carbon core and alumina shell filaments were successfully manufactured by robotically controlled co-extrusion. As feedstocks carbon and alumina gels with significantly different rheological properties were prepared. During co-extrusion, the core paste exhibited a much higher viscosity than the shell paste, which benefited the co-extrusion process. Simultaneously, the core and shell diameters were exactly controlled by core and shell feed pressures and studied by numerical simulation. The experimentally and numerically derived filament wall thickness showed qualitative agreement with each other; with decreasing core pressure during co-extrusion, the wall thickness increased.
5 February 2020 in Advanced Engineering Materials
Herein, the possibility of generating Raney‐Copper catalysts with high geometric complexity is demonstrated. For this, periodic open cellular structures (POCS) composed of a highly brittle Al–Cu alloy containing 29.4 at% copper are fabricated by selective electron beam melting (SEBM) for application in chemical reaction engineering. After selective leaching of aluminum in an NaOH solution, the POCS show a core–shell structure with a nanoporous copper surface layer and a solid core. The fabrication and dealloying processes as well as the microstructure are studied. Moreover, the SEBM‐processed Raney‐type copper catalysts show a high catalytic activity in methanol synthesis.
3 April 2019 in The International Journal of Advanced Manufacturing Technology
12 November 2026 in Beilstein Journal of Nanotechnology
AAAbdel Rahman Altakroury
Pulsed laser ablation in liquids (PLAL) is a versatile and sustainable technique for the synthesis of ligand-free colloidal nanoparticles, but its wider application is limited by relatively low productivity and insufficient control over particle size distributions. Here, to advance the technique, we investigate the possibility of combining in one synthesis process the advantages of two recently developed cost-effective approaches, multibeam PLAL for productivity increase and donut-shaped laser beams for particle size modification. Nanoparticles of gold, an iron–nickel alloy, and a high-entropy alloy were produced in water using single-beam and multibeam configurations with four and eleven picosecond sub-beams. The effects of beam profile, beam-splitting factor, and laser fluence on particle yield and size distributions were systematically evaluated. Splitting donut-shaped beams is shown to offer a similar productivity increase as Gaussian pulses, and, at moderate fluences, multiple donut beams can be even more efficient. A single donut-shaped beam generally reduces the particle size, but, in a multibeam configuration, the reduction effect is hindered by secondary processes such as the interaction of cavitation bubbles, nanoparticle fragmentation, and redeposition. The results demonstrate the feasibility of combining donut-shaped beams with multibeam ablation in PLAL synthesis and identify key process parameters that have to be optimized to achieve both high productivity and improved particle size control.