The reduction of energy consumption in the supercritical carbon dioxide extraction of essential oils from leaves of species of the Lamiaceae family due to the optimal pretreatment of herbaceous material was studied in the present work. Essential oils of species of the Lamiaceae family are stored in peltate glandular trichomes on the leaf surface, and the optimal pretreatment for this type of secretory structure should include grinding followed by supercritical carbon dioxide batch (non-flow) pretreatment under extraction conditions prior to continuous flow extraction. Supercritical fluid extractions of peppermint (Mentha piperita), wild thyme (Thymus serpyllum) and hyssop (Hyssopus officinalis) leaves were performed including only grinding pretreatment as well as optimal pretreatment. The experimentally determined reductions of supercritical carbon dioxide consumption, for the observed extraction yields, ranged from 0.250 to 0.889 kg CO2 per gram of produced essential oil extract, while the corresponding reductions of energy consumption were in the range 48-170.7 kJ per gram of produced essential oil extract.
Biodiesel is defined as a fuel that might be used as a pure biofuel or at high concentration in mineral oil derivatives, in accordance with specific quality standards for transport applications. The main raw material used for biodiesel production is rapeseed, which contains mono-unsaturated (about 60%) and also, in a lower quantity, poly-unsaturated fatty acids (C 18:1 and C 18:3), as well as some amounts of undesired saturated fatty acids (palmitic and stearic acids). Other raw materials have also been used in the research and industrial production of biodiesel (palm-oil, sunflower-oil, soybean-oil, waste plant oil, animal fats, etc). The historical background of the biodiesel production, installed industrial capacities, as well as Directives of the European Parliament and of the Council (May 2003) regarding the promotion of the use of biofuels or other renewable fuels for transport are discussed in the first part of this article (Chem. Ind. 58 (2004)). The second part focused on some new concepts and the future development of technology for biodiesel production based on the use of non-catalytic transesterification under supercritical conditions. A literature review, as well as original results based on the transesterification of animal fats, plant oil and used plant oil were discussed. Obtained results were compared with the traditional concept of transesterification based on base or acid catalysis. Experimental investigations of transesterification with supercritical methanol were performed in a 2 dm3 autoclave at 140 bar pressure and at 300?C with molar ratio of methanol to triglycerides of about 41. The degree of esterification strongly depends on the density of supercritical methanol and on the possibility of reaction occurring in one phase.
1 January 2001 in Journal of the Serbian Chemical Society
The alumina/silica with zinc chloride aerogel alkylation catalyst was obtained using a one step sol-gel synthesis, and subsequent drying with supercritical carbon dioxide. The aerogel catalyst activity was found to be higher compared to the corresponding xerogel catalyst, as a result of the higher aerogel surface area, total pore volume and favourable pore size distribution. Mixed Al-O-Si bonds were present in both gel catalyst types. Activation by thermal treatment in air was needed prior to catalytic alkylation, due to the presence of residual organic groups on the aerogel surface. The optimal activation temperature was found to be in the range 185-225 ?C, while higher temperatures resulted in the removal of zinc chloride from the surface of the aerogel catalyst with a consequential decrease in the catalytic activity. On varying the zinc chloride content, the catalytic activity of the aerogel catalyst exhibited a maximum. High zinc chloride contents decreased the catalytic activity of the aerogel catalyst as the result of the pores of the catalyst being plugged with this compound, and the separation of the alumina/silica support into Al-rich and Si-rich phases. The surface area, total pore volume, pore size distribution and zinc chloride content had a similar influence on the activity of the aerogel catalyst as was the case of xerogel catalyst and supported zinc chloride catalysts.
The GreenCleanS project is financed on behalf of The Science Fund of the Republic of Serbia and its main idea is to introduce new technology for the removal of elemental sulphur from mineral transformer oils using low temperature reagent-based technology and change hazardous practice of oil regeneration with reactivating adsorbents. These technologies blow off toxic emissions (dioxins) if applied on non PCB-free oil and additionally produce elemental sulphur which induce power transformer failure. Most of these technologies can't remove elemental sulphur once it has contaminated transformer oil. Newly developed technology - GreenCleanS with previously patented technology for the removal of PCB and corrosive disulphides will become integrative solution 3PINT for the removal of elemental sulphur, PCB, disulphides and oil ageing products from mineral transformer oils. Development of new technology for the removal of elemental sulphur from transformer oils have included insulating oil treatments on laboratory scale, followed by optimization of process parameters on a pilot scale (TRL4), and demonstration of developed technology in operational environment in Serbia on batch of 3 tons of oil in INT mobile plant to achieve TRL 7. Previously patented technology will be included in on-site demonstration in order to demonstrate integrative solution for mineral transformer oil treatment - 3PINT. Project results are going to contribute to green and sustainable power delivery and benefits for the environment and society. Mitigation of power transformers failures and reduction of air pollution, caused by currently applied oil regeneration processes with reactivating adsorbents will be available with development of GreenCleanS and utilization of 3PINT. Reduction of waste oil generation, pollution of the environment and power transformers carbon footprint will bring strong positive impact on, huge savings on the costs of capital equipment, avoiding economic and societal losses of undelivered electricity.