1 January 2021 in Shock and Vibration
The preevaluation to the vulnerability of the surrounding rocks is proposed as one of the reliable indicators of the safety coefficient of gateway support and a foundation to optimize the support design parameters. In this study, taking the surrounding rocks, stress, geological environment, and service time into consideration, the safety coefficient is determined based on the vulnerability scores calculated by the vulnerability preevaluation model of the surrounding rock. Applying the safety coefficient to the instability evaluation of the composite rock‐bolt bearing structure, the strength required to maintain the stability of the gateway is calculated, which further provides references and guidance to the optimization of the anchor support parameters. This method has been successfully adopted by the GuCheng coal mining project in N1303 tailgate to strengthen the anchor‐bolt structure in the roof watering area especially the main inclined shaft. Applying more accurately calculated strength to the anchor‐bolt structure can effectively avoid the issue of overcompensation, thus reducing the cost and increasing the driving speed. Furthermore, this method provides insights into optimizing design parameters of the gateway. This method provides a reliable basis for the optimization design of bolt support parameters in coal mine gateway.
1 January 2021 in Advances in Civil Engineering
The roadway roof is a key factor to the roadway stability. The analysis of roof stability is mainly based on numerical calculation and on‐site observation, while the basic theory of the bearing mechanism is relatively weak. We have founded a critical pressure calculation model, on the theory of compressive bar, for the rectangle coal roadway stability. The model has been tested and verified on accuracy and feasibility while applied on a roadway case. The critical pressure for roof stability and roof bending moment and deflection under combined axial and lateral load was deduced using the theory of compressive bar stability. The numerical calculation verified the feasibility of numerical modeling of stability of compressive bar using FLAC3D, and the influence of the background ambient horizontal stress and the parameters of the contact surface to the roof stability were further studied. The result turns out that some factors lead to a higher instability tendency, including higher horizontal stress, higher cohesion force, and larger internal friction angle on the coal‐rock interface and lower cohesion force and smaller friction angle on the rock‐rock interface. The results contribute to bearing mechanisms of roadway roof stability, ground pressure and strata control theory and application, and design of bolting support.