Mine dust is one of the main disasters that threatens the safety of coal mine production, deteriorates the underground working environment and induces various occupational diseases. Based on the harm of mine dust identified and the current domestic and foreign dust-proof technology, the technical research of the foam dust reduction is reviewed; the advantages and disadvantages of foam dust reduction are also discussed. According to the experimental exploration and the study of foam flow characteristics, the process of foam device and foam nozzle separation was adopted, and some site tests were conducted in fully mechanized mining and excavation working faces in Zhangcun, Shanjiaoshu and Jinjia coal mines. The foam technology led to a 59.5% dust removal efficiency in Zhangcun coal mine, which is much higher than the dust removal efficiency of the water spray dust reduction. The efficiency of total mine dust in Shanjiaoshu coal mine reached as high as 72%, and the efficiency of respirable mine dust reached 67%. Compared with the circumstance with no dust-control measure, the average density of the total mine dust in Jinjia coal mine decreased by 22.75~32.95% using foam technology. The results show that the use of the foam to inhibit the transformation of mine dust from the source of dust production to the floating state and the efficiency of dust control is greatly improved. This method can effectively reduce the mine dust density in underground mining and excavation working faces, clean the working environments, and guarantee the health of miners. The research results are of great significance for improving the production conditions of mining and excavating face and building green mines and standardized mines. Moreover, foam technology for dust control has been widely used in coal mines.

Based on the assumption that rock strength follows the log normal distribution statistically, this paper establishes a damage constitutive model of rock under uniaxial stress conditions in combination with the Mohr–Coulomb strength criterion and damage mechanical theory. Experiments were carried out to investigate the damage evolution process of rock material, which can be categorized into nondamaging, accelerated growth, constant‐speed, similar growth, and speed‐reducing growth stages. The evolution process had a good corresponding relationship with the rock stress‐strain curves. Based on the statistical damage constitutive model proposed in this paper, a numerical fitting analysis was conducted on the uniaxial compression testing data of laboratory sand rock and on experimental data from other literature, in order to validate the rationality of the constitutive equation and the determination of its parameters and to analyze the effect of internal friction variables on damage variables and compression strength. The research outcomes presented in this paper can provide useful reference for the theory of rock mechanics and for rock engineering.

Gas fracturing technology for enhancing rock permeability is an area with considerable potential for development. However, the complexity and variability of underground conditions mean that a variety of rock physical parameters can affect the outcome of gas fracturing, with temperature being a critical factor that cannot be overlooked. The presence of a temperature field adds further complexity to the process of gas-induced rock fracturing. To explore the effects of temperature fields on gas fracturing technology, this paper employs numerical simulation software to model the extraction of shale gas under different temperature conditions using gas fracturing techniques. The computer simulations monitor variations in the mechanical characteristics of rocks during the process of gas fracturing. This analysis is performed both prior to and following the implementation of a temperature field. The results demonstrate that gas fracturing technology significantly improves rock permeability; temperature has an impact on the effectiveness of gas fracturing, with appropriately high temperatures capable of enhancing the fracturing effect. The temperature distribution plays a crucial role in influencing the results of gas fracturing. When the temperature is low, the fracturing effect is diminished, resulting in a lower efficiency of shale gas extraction. Conversely, when the temperature is high, the fracturing effect is more pronounced, leading to a higher shale gas production efficiency. Optimal temperatures can enhance the efficacy of gas fracturing and consequently boost the efficiency of shale gas extraction. Changes in the parameters of the rock have a substantial impact on the efficiency of gas extraction, and selecting suitable rock parameters can enhance the recovery rate of shale gas. This paper, through numerical simulation, investigates the influence of temperature on gas fracturing technology, with the aim of contributing to its improved application in engineering practices.

Through studying the mechanics, energy, and deformation features of rock under uniaxial cyclic loading and unloading, the findings are as follows: (1) under cyclic loading and unloading, the curve of stress and strain for loading and unloading in every cycle was not superposition reciprocally but formed an acutifoliate hysteresis loop. The distribution of the hysteresis loop became denser with the cycles and moved toward the direction of strain increasing. (2) The area of the hysteresis loop indicated the inner damage degree of rock. And the hysteresis energy accumulated was stronger; the damage of rock was more serious. Furthermore, the hysteresis energy grew linearly along with load, and the hysteresis energy accumulated had a trend exponential growth with cycle continuing. (3) The elasticity modulus grew in the form of logarithm as a whole. In each cycle, elasticity modulus for unloading was greater than that for loading. When it exceeded a certain value, elasticity modulus for reloading was less than elasticity modulus for unloading. (4) The cyclic loading and unloading had a strength impact that was gradually stronger and stronger as the cycle went on the sample of rock.

Enhanced geothermal systems (EGS) are a key technology for developing deep geothermal resources, yet they face significant challenges in constructing efficient thermal reservoirs within high-stress, high-strength, and low-permeability crystalline rock formations. Traditional hydraulic fracturing (HF) techniques encounter deep challenges in these environments, including excessively high fracturing pressures, limited fracture network patterns, and the risk of induced seismicity. This paper reviews the multi-scale thermal-mechanical mechanisms, fracture evolution patterns, and control strategies associated with thermal stimulation and permeability enhancement in the modification of deep geothermal reservoirs. Research indicates that thermally induced fracturing triggers intergranular and transgranular cracks at the microscopic scale due to mineral thermal expansion mismatches, which macroscopically manifests as nonlinear degradation of rock strength and modulus. The redistribution of the thermal elastic stress field significantly lowers the breakdown pressure, while matrix thermal contraction increases fracture aperture, leading to an exponential enhancement of permeability following a cubic law. However, the high confining pressure constraints, true triaxial stress anisotropy, and thermal short-circuiting risks present substantial suppression and challenges to the effectiveness of thermal stimulation in deep in situ environments. Different fracturing media, such as water, liquid nitrogen (LN₂), and supercritical CO₂, exhibit varying advantages in thermal stimulation efficiency due to their unique thermal-flow characteristics. Future research should focus on the thermal-mechanical coupling mechanisms under true triaxial stress conditions, and develop intelligent control strategies for permeability enhancement and thermal short-circuiting risk mitigation. This study synthesizes existing analyses and proposes potential engineering strategies for stimulating deep EGS reservoirs, offering significant strategic value for the development of geothermal energy as a baseload renewable resource.

In-situ rock stress was measured in the development roadway of Gucheng coal mine at +420 m level by using the stress relief method of hollow inclusion. The results show that the first principal stress was the vertical stress, the maximum horizontal principal stresses were distributed in the range of N10°E and N20°E, and the average side pressure coefficient was 0.83. There was a large difference between the maximum horizontal principal stress and the minimum horizontal principal stress, and the calculated average ratio was 2.02. A spatial stress conversion model of the horizontal roadway based on the measured in-situ rock stresses was built, and the distribution laws of stress and displacement of the surrounding rock of the roadway were analyzed in depth along the changing radial direction. According to the Mohr–Coulomb failure criterion, an asymmetric surrounding rock plastic zone was obtained and the plastic failure radius was 5.0 m. Considering the roadway-surrounding rock differential control, the stronger support in the risk areas was practiced and validated. The work in this paper would provide some ideas for the design and optimization of the support parameters for roadway engineering.