1 December 2018 in Global and Planetary Change
17 June 2019 in Geofluids
Surface deformation due to fluid extraction can be detected by satellite-based geodetic sensors, providing important insights on subsurface geomechanical properties. In this study, we use Differential Interferometric Synthetic Aperture Radar (DInSAR) observations to measure ground deformation due to fluid extraction at the Los Humeros Geothermal Field (Puebla, Mexico). Our main goal is to reveal the pressure distribution in the reservoir and to identify reservoir compartmentalization, which can be important aspects for optimizing the production of the field. The result of the PS-InSAR (Persistent Scatterer by Synthetic Aperture Radar Interferometry) analysis shows that the subsidence at the LHGF was up to 8 mm/year between April 2003 and March 2007, which is small relative to the produced volume of. The subsidence pattern indicates that the geothermal field is controlled by sealing faults separating the reservoir into several blocks. To assess if this is the case, we relate surface movements with volume changes in the reservoir through analytical solutions for different types of nuclei of strain. We constrain our models with the movements of the PS points as target observations. Our models imply small volume changes in the reservoir, and the different nuclei of strain solutions differ only slightly. These findings suggest that the pressure within the reservoir is well supported and that reservoir recharge is taking place.
15 March 2022 in Geothermal Energy
Excessive thermal water volumes have been extracted from porous sedimentary rocks in the Hungarian part of the Pannonian Basin. Thermal water production in Hungary increased significantly from the early 1970s. Regional-scale exploitation of geothermal reservoirs without re-injection resulted in basin-scale pressure drop in the Upper Pannonian (Upper Miocene) sediments, leading to compaction. This compaction resulted in ground subsidence primarily through poro-elastic coupling.We investigated surface deformation at the Szentes geothermal filed, SE Hungary, where the largest pressure decline occurred. Subsequently, hydraulic head recovery in the western part of the geothermal reservoir was initiated in the mid-1990s. We obtained data from the European Space Agency’s Envisat satellites to estimate the ground motions for the period of November 2002–December 2006. We applied inverse geomechanical modeling to estimate reservoir properties and processes. We constrained the model parameters using the Ensemble Smoother with Multiple Data Assimilation, which allowed us to incorporate large amounts of surface movement observations in a computationally efficient way. Ground movements together with the modeling results show that uplift of the Szentes geothermal field occurred during the observation period. Since no injection wells were operated at Szentes before 2018, and production temperatures remained relatively constant through the entire production period, we explain ground uplift with pore pressure increase due to natural recharge. The estimated decompaction coefficients of the reservoir system characterizing the elastic behavior of the Szentes geothermal reservoir varies between ~ 0.2 × 10–9 and 2 × 10–9 Pa−1. Compaction coefficients of the reservoir system corresponding to the earlier depressurization period, from ~ 1970 to the mid-1990s, may be significantly larger due to the potential inelastic behavior and permanent compaction of clay-rich aquitards. The improved parametrization enables better forecasting of the reservoir behavior and facilitates the assessment of future subsidence scenarios that are helpful for the establishment of a sustainable production scheme.
22 January 2025 in Solid Earth
The reconstruction of thermal evolution in sedimentary basins is a key input for constraining geodynamic processes and geo-energy resource potential. We present a methodology to reproduce the most important transient thermal footprints accompanying basin formation: lithosphere extension and sedimentation. The forward model solving the transient heat equation is extended with an inversion workflow to constrain models with temperature measurement, providing estimates on model parameters, most importantly the amount of lithosphere stretching. We apply the methodology to the NW part of Hungary. We test the effect of variations in model input parameters on the resulting temperature estimates and discuss the uncertainties and limitations of the modelling technique. Realistic past and present-day temperature predictions for the entire lithosphere are achieved for a carefully assessed set of input parameters, suggesting the strong attenuation of the mantle lithosphere through extension and relatively small variations in the present-day thermal lithosphere thickness. The new temperature model can be used to constrain geodynamic processes and lithosphere structure and rheology, and it can serve as a first-order boundary condition for geothermal exploration.
10 March 2017 in Acta Geodaetica et Geophysica
21 September 2022 in Acta Geodaetica et Geophysica