Iane Silva Pereira

Iane Silva Pereira

Auto-generated profile, based on publicly available information

Iane Silva Pereira

Universidade Federal do Paraná

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 September 2020 in Revista Brasileira de Cartografia
Verified
Journal Article
Open access
PDF file
IPIane Silva Pereira
Iane Silva Pereira
JFJuliana Moulin Fosse
Juliana Moulin Fosse
In order to make three-dimensional modeling more accessible within the scope of Cartography and encourage their practice, this research addressed the use of low-cost and portable three-dimensional scanners for generation of cartographic products, for the purposes of documentation, reproduction or representation of virtual models. As this practice is still little explored in Brazil, this research presents a specific methodology to evaluate which of these scanners is the best in terms of cost-benefit. Three three-dimensional scanners were evaluated: the 3D Scanner Pro 1.0, the Scanner 3D Sense, and the MakerBot Digitizer Desktop 3D Scanner. Six prototypes were modeled, printed by a 3D printer, and scanned by each of these three three-dimensional scanners. Three evaluation parameters were defined: the technical specification, the user experience and the statistical analysis. Three variables were considered to evaluate the technical specifications: resolution, mobility and cost. The ease of use and scanning time were considered to evaluate the user experience. And the prototypes measurements were used to evaluate the statistical analysis, compared to the original measurement of them. The obtained results presented similar values for the 3D Scanner Pro 1.0 and the MakerBot Digitizer Desktop 3D Scanner. Due to the 3D Scanner Pro 1.0 has a lower cost than the MakerBot Digitizer Desktop 3D Scanner, the former was chosen as the best cost-benefit scanner. To complement this research and to verify the practical potential of this technology, two new features were chosen, scanned with the selected scanner and printed by a 3D printer. The results were satisfactory and, due to that, they encourage the use of this technology as a means of generating 3D cartographic products.

1 January 2024 in Ciência Rural
Verified
Journal Article
Open access
PDF file
KSKátia Alessandra Mendes da Silva
Kátia Alessandra Mendes da Silva
LFLuis Felipe Barbosa Braga Feitoza
Luis Felipe Barbosa Braga Feitoza
IPIane Silva Pereira
Iane Silva Pereira
SMSilvia Conceição Reis Pereira Mello
Silvia Conceição Reis Pereira Mello
ABAlessandra Carreiro Baptista
Alessandra Carreiro Baptista
GOGesilene Mendonça de Oliveira
Gesilene Mendonça de Oliveira
This article presents an experimental study to verify the feasibility of using the emerging UAV technology in the mapping of fishing grounds exploited by artisanal fishing in Sepetiba Bay, in the south of the state of Rio de Janeiro-Brazil, aiming to better understand the functionality and information generated by the equipment, and whether the data can help improve local fisheries management and also provide information for the implementation of simplified traceability for regional fish. The study area included four locations, Ilha da Madeira, Vila Geny, Coroa Grande and Ponte Preta, all located in Sepetiba Bay, located in the municipality of Itaguaí, in the southern region of the state of Rio de Janeiro. The aerial mapping was carried out in September, October and November 2017, between 10 am and 12 pm (GMT-3), employing a Phantom 3 Professional UAV (DJI, Shenzhen, China), Anac Brasil registration number PP-011092014. The onboard camera a DJI 4K Edition Sony Exmor R Model IMX117: 7.81mm equipped with a CMOS sensor dimension of 6.2 mm, 4000 x 3000 12 megapixel resolution, with an f/2.8 lens and field of view (FOV) of 94, having a focal length of 14mm. Images were collected perpendicularly to the main plan. Flight height was set at 80 m, flight speed was determined based on the overlap of 80%, dimension of area to be mapped, and battery life. Hence, the operator utilized a average flight speed of 25 km/h. ground sample distance (GSD) was 1.20 cm/px. and an overlap of 80% between images was established to avoid possible failures and orthomosaic information gaps. For each fishery mapped, standard software processing was carried out, which consists of: aligning the photos, creating a point cloud, creating a digital elevation model, and finally the orthomosaic itself. Once processed, the orthomosaics were exported from Agis Soft Photo Scan Professional to Google Earth (Google Inc.), where it is possible to make a more comprehensive assessment of fisheries in a much more practical and faster way. A total of four flights were carried out, one for each study area, averaging 10 minutes each. As a result, the technology proved to be viable to apply, since it made it possible to identify and map the areas defined for this research, generating data such as distance and, characteristics of the place, which could be used to track the fish caught and landed, in addition to enabling the monitoring of vessels and fishing, and thus improve the management of local fisheries.

19 June 2026 in Applied Geomatics
Verified
Journal Article
Open access
IPIane Silva Pereira
Iane Silva Pereira
LVLuis Augusto Koenig Veiga
Luis Augusto Koenig Veiga
Samir de Souza Oliveira AlvesSamir de Souza Oliveira Alves
Samir de Souza Oliveira Alves
In recent years, research in Structural Health Monitoring (SHM) has intensified due to the growing demand for efficient inspection, monitoring, and maintenance of civil engineering structures. To meet this demand, studies have focused on developing non-destructive techniques (NDT) capable of providing accurate and continuous assessments. Among these, point clouds have emerged as a robust approach to capture comprehensive environmental data and provide detailed information for further analysis. This paper presents a state-of-the-art review summarizing advancements over the last ten years in the use of point clouds obtained by laser scanning and photogrammetry in SHM. Initially, an overview of the data acquisition techniques and their operational principles is presented. Subsequently, relevant studies selected through a systematic literature review are analyzed, emphasizing their methodologies, advantages, and limitations. Finally, the paper discusses the current challenges in integrating point cloud technologies into SHM frameworks and outlines potential future research directions aimed at enhancing their precision and automation capabilities.

1 July 2026 in Revista de Geociências do Nordeste
Verified
Journal Article
Open access
PDF file
IPIane Silva Pereira
Iane Silva Pereira
Samir de Souza Oliveira AlvesSamir de Souza Oliveira Alves
Samir de Souza Oliveira Alves
LVLuis Augusto Koenig Veiga
Luis Augusto Koenig Veiga
A segurança estrutural é uma preocupação fundamental na engenharia civil, tornando essencial o monitoramento de manifestações patológicas, especialmente fissuras, que estão entre os defeitos mais frequentes em estruturas de concreto. A caracterização precisa dessas fissuras é crucial para garantir a integridade estrutural e prevenir falhas. Métodos tradicionais frequentemente dependem de ensaios destrutivos ou inspeções visuais, que podem danificar a estrutura ou depender da experiência do operador. Em contraste, técnicas não destrutivas permitem uma aquisição de dados mais confiável e reprodutível. Este estudo apresenta uma análise comparativa da caracterização de fissuras utilizando técnicas de luz estruturada e Structure from Motion (SfM). Ambas geram nuvens de pontos das quais é possível extrair informações geométricas, como a abertura de fissuras. O estudo foi realizado em uma fissura localizada no Restaurante Universitário Botânico, em Curitiba, Paraná. A aquisição de dados foi feita com um scanner portátil de luz estruturada e um smartphone para o SfM, utilizando alvos calibrados referenciados por estação total. Os resultados indicam que ambas as técnicas são adequadas, sendo a luz estruturada mais estável em medições locais, enquanto o SfM apresenta melhor acurácia na geometria global.

1 January 2026 in Boletim de Ciências Geodésicas
Verified
Journal Article
Open access
IPIane Silva Pereira
Iane Silva Pereira
LVLuis Augusto Koenig Veiga
Luis Augusto Koenig Veiga
Pathological manifestations in civil structures represent one of the main problems that compromise the useful life of constructions, among the most common are cracks or fissures. In this research, the feasibility of using point clouds in the determination and measurement of cracks was investigated. The experiment was carried out in a controlled environment comparing the values obtained by point clouds using photogrammetry with the reference values obtained by laser interferometer (our reference). The results indicated that point clouds generated from a scanner that uses structured light for modeling exhibited high consistency with reference values, with differences of less than a millimeter. Conversely, portable scanning equipment with lower resolution demonstrated limited performance, unable to accurately define crack dimensions below one centimeter. These findings highlight that the applicability of point clouds for crack monitoring is strongly dependent on the scanning technology employed. The research confirms the potential of structured-light 3D scanning as a reliable and cost-effective approach for structural health monitoring and early damage assessment.