1 January 2016 in Transportation Research Record: Journal of the Transportation Research Board
Using reclaimed and recycled materials in asphalt mixtures is one of the most commonly used sustainable strategies, which results in cost savings and environmental benefits because they replace virgin materials. Commonly used recycled, reclaimed asphalt pavement (RAP) and recycled asphalt shingles (RAS) can pose challenges because their inclusion in the asphalt mixture may adversely affect pavement performance. This paper presents the recently developed fracture testing method, the Illinois semicircular bending (IL-SCB) fracture geometry at 25°C with a displacement rate of 50 mm/min. The flexibility index (FI), derived from the IL-SCB test results, was introduced to rank the potential cracking resistance of mixes. The developed testing protocol provides a practical and reliable approach to screen the capacity of mixes to resist cracking. An application of the IL-SCB test method and FI is presented using laboratory-prepared and compacted mixes with varying proportions of RAP and RAS. The mixes were designed and prepared with strict volumetric requirements, enabling comparison of the effects of RAP and RAS only. Fracture testing was conducted at low and intermediate temperatures. Fracture testing results indicate a consistent trend at intermediate temperatures using both fracture energy and the FI. The discrimination potential and sensitivity of the FI to even small changes in the mix design properties enable integration of the IL-SCB test method and FI as a performance quality indicator. Finally, the FI and Hamburg wheel-tracking test results are combined in an interaction plot that can be used as a performance-based mix design tool along with volumetrics requirements.
1 September 2017 in Engineering Fracture Mechanics
27 January 2017 in International Journal of Fracture
18 August 2018 in Transportation Research Record: Journal of the Transportation Research Board
The Illinois Department of Transportation adopted the Illinois Flexibility Index Test (I-FIT) to evaluate the cracking vulnerability of asphalt concrete (AC) mixtures that was often shown to increase with the addition of recycled materials such as reclaimed asphalt pavement and recycled asphalt shingles. The test consists of a semi-circular AC sample that has a notch, loaded along the symmetric axis. Fracture energy (FE), post-peak slope, and the flexibility index (FI) are computed from the load displacement curve. These results can be influenced by specimen geometry and test parameters such as loading rate, AC voids content, and so forth. Therefore, this study investigated the effect of notch length, specimen thickness, loading rate, and AC air void content on the I-FIT results. It was found that an increase in the specimen thickness or loading rate resulted in a steeper post-peak slope without affecting the FE. As a result, the FI decreased. An increase in the notch length or AC air void content resulted in a flatter post-peak slope, thus, increasing the FI. From the results, it was concluded that existing correction factors to address the variations caused by specimen thickness and air void content are appropriate. A correction factor to address notch length variations is proposed. A unique correction factor for loading rate could not be developed because of the varying rate dependency of each AC mixture.
6 October 2023 in International Journal of Pavement Engineering
1 September 2018 in Engineering Fracture Mechanics