This work reports on the growth of 1 µm nonpolar a-plane Al0.7Sc0.3N(11 0) thin films on an r-plane sapphire Al2O3(1 02) via magnetron sputter epitaxy. The electro-acoustic properties of the film structures were characterized using surface acoustic wave (SAW) resonators. Measured electrical responses were found to be strongly anisotropic in terms of the wave propagation direction. We identified a sagittal polarized Rayleigh wave mode with large coupling ( 3.7%), increased phase velocity ( 4825 m/s), as well as high quality factor (Q >1000) for SAW propagation along the c-axis [0001] and normalized thicknesses . Finite element method simulations using electro-acoustic properties of Al0.7Sc0.3N obtained from the density functional theory reproduce our experimental results.
It is more difficult to nucleate AlN-ScN alloy thin films (AlScN) in pure (0001)-texture than it is with pure AlN thin films. AlN thus can serve as seed layer for AlScN. Equipment limitations may lead to the problem of a vacuum break between AlN and AlScN deposition, as it leads to oxidation of the AlN surface. This issue was studied with high resolution TEM and electron diffraction. The formed oxide layer disturbed a lot the epitaxial growth, leading to additional grain orientations. A mild RF etching step introduced before AlScN deposition was able to remove the oxide layer, and allowed for growing Al 0.84 Sc 0.16 N in local epitaxy on AlN, as shown by Hyper map EDX images. The resulting AlScN films show a pure (0001) texture. Double beam laser interferometry and finite element modeling were used to determine d 33, f of both layers together as 6.6 pm/V, and of 6.85 pm/V for AlScN alone when using the standard value of 3.9 pm/V for pure AlN. At the same time, the relative dielectric constant of Al 0.84 Sc 0.16 N was determined as 14.1.