Fazal E. Subhan

Fazal E. Subhan

Auto-generated profile, based on publicly available information

Fazal E. Subhan

Dublin City University

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 July 2020 in RSC Advances
Verified
Journal Article
Open access
PDF file
FSFazal E. Subhan
Fazal E. Subhan
AKAimal Khan
Aimal Khan
AKAdnan Khan
Adnan Khan
NUNajeeb Ullah
Najeeb Ullah
MIMuhammad Imran
Muhammad Imran
MNMuhammad Noman
Muhammad Noman
Tandem configuration-containing perovskite and silicon solar cells are promising candidates for realizing a high power conversion efficiency of 30% at reasonable costs. Silicon solar cells with planar front surfaces used in tandem devices cause high optical losses, which significantly affects their efficiency. Moreover, some studies have explored the fabrication of perovskites on textured silicon cells. However, due to improper texturing, light trapping is not ideal in these devices, which reduces the efficiency. In this work, we optimized the pyramid height of textured silicon cells and efficiently characterized them to achieve enhanced light trapping. Two different kinds of perovskites, namely, Cs0.17FA0.6Pb(Br0.17I0.7)3 and Cs0.25FA0.6Pb(Br0.20I0.7)3 with wide bandgaps were conformally deposited on textured silicon cells, and the performance of these flat and fully textured tandem devices was numerically analyzed. The thickness of each layer in the tandem cell was optimized in a way to ensure a perfect current match between the top perovskite and bottom silicon subcells. The results indicated that the textured tandem configuration enhances light absorption over a broad spectral range due to the optimized pyramid height compared to flat surfaces. Eventually, the photovoltaic parameters of the proposed tandem cell were compared with the already existing structures, and our design supports large values of open circuit voltage (Voc) = 1.78 V, short circuit current density (Jsc) = 20.09 mA cm−2, fill factor (FF) = 79.01%, and efficiency (η) = 28.20% compared to other kinds of tandem solar cells.

14 August 2024 in IEEE Communications Surveys & Tutorials
Verified
Journal Article
Open access
FSFazal E. Subhan
Fazal E. Subhan
AYAbid Yaqoob
Abid Yaqoob
CMCristina Hava Muntean
Cristina Hava Muntean
GMGabriel-Miro Muntean
Gabriel-Miro Muntean
Network slicing is an emerging paradigm driven by an objective to provide support for personalized services in the highly evolving and dynamic 5G and beyond network environment. The management of network functions and resources under network slicing architecture for rich media content delivery is a challenging task that requires an efficient decision at all network levels to maintain the required Quality of Service (QoS) and Quality of Experience (QoE). Integrating Artificial Intelligence (AI) in the network slice architecture for taking efficient network decision is one of the potential solutions to the problem. In this paper, we summarize the network slicing enabling technologies such as Software Defined Network (SDN), Network Function Virtualization (NFV), Multi-access Edge Computing (MEC) in the context of AI for improving the rich media content delivery. In addition, we present a comprehensive survey on content-centric networking and delivery solutions based on network slicing technologies i.e., MPEG-DASH-enabled Information Centric Networking (ICN) and Content Delivery Network (CDN) for intelligent rich media content caching and prefetching, predictive analysis, content preference optimization, secure resource allocation, and dynamic traffic steering. Several standardization and orchestration mechanisms of 5G network slicing proposed by 3GPP are then presented. Finally, the challenges of AI-enabled 5G network slicing for immersive content delivery are outlined with potential solutions and future research opportunities.

8 January 2025 in IEEE Access
Verified
Journal Article
Open access
Renhai FengRenhai Feng
Renhai Feng
Wajid KhanWajid Khan
Wajid Khan
MFMuhammad Faheem
Muhammad Faheem
JWJiang Wang
Jiang Wang
FSFazal E. Subhan
Fazal E. Subhan
MBMuhammad Shoaib Bhutta
Muhammad Shoaib Bhutta
This paper focus on the application of Physics Informed Neural Network (PINN) for extracting parameters of photovoltaic (PV), wind, and energy storage equipment models. Accurately extracting the parameters of these models is essential for effectively controlling and optimizing the overall stability of Chongqing power system (CPS). Despite numerous algorithms proposed to tackle this issue, accurately and reliably extracting the parameters of these remains a significant challenge. This paper proposed an improved PINN, named Uniform Physics Informed Neural Network (UPINN), with Proximal Policy Optimization (PPO) based reinforcement learning, for extortion of parameters of these models. The PINN difficulty is overcome in UPINN by configuring four strategies: feedback operator, GRU gating mechanisms, transfer operator with historic population, and modification factor with PPO aided reinforcement learning. UPINN models are trained iteratively to maximize parameters and reduce RMSE. UPINN accurately extracts parameters and describes the behavior of PV, wind, and energy storage equipment models as it converges towards optimal solutions through parameter adjustments and RMSE evaluations. The UPINN was implemented for real-time voltage stability monitoring of CPS. The results show that UPINN performs better than other neural network models in respect of accuracy and stability, demonstrating the effectiveness of improved strategies. Moreover, its emphasis the importance of computed and estimated indices obtained through UPINN for predicting voltage collapse occurrences within the system.

24 March 2020 in RSC Advances
Verified
Journal Article
Open access
PDF file
FSFazal E. Subhan
Fazal E. Subhan
AKAimal Khan
Aimal Khan
FHFazal E. Hilal
Fazal E. Hilal
AKAdnan Khan
Adnan Khan
SKSultan Khan
Sultan Khan
MNMuhammad Noman
Muhammad Noman
Thin film solar cells (TFSCs) suffer from poor light absorption due to their small thickness, which limits most of their practical applications. Surface plasmons generated by plasmonic nanoparticles offer an opportunity for a low-cost and scalable method to optically engineer TFSCs. Here, a systematic simulation study is conducted to improve the absorption efficiency of amorphous silicon (a-Si) by incorporating double sided plasmonic bi-metallic (Al–Cu) nanogratings. The upper pair of the gratings together with an antireflection coating are responsible for minimizing the reflection losses and enhancing the absorption of low wavelength visible light spectrum in the active layer. The bottom pairs are accountable for increasing the absorption of long wavelength photons in the active layer. In this way, a-Si, which is a poor absorber in the long wavelength region, is now able to absorb broadband light from 670–1060 nm with an average simulated absorption rate of more than 70%, and improved simulated photocurrent density of 22.30 mA cm−2, respectively. Moreover, simulation results show that the proposed structure reveals many other excellent properties such as small incident angle insensitivity, tunability, and remarkable structural parameters tolerance. Such a design concept is quite versatile and can be extended to other TFSCs.

1 April 2020 in Optik
Verified
Journal Article
Closed access
AFAfrasiab
Afrasiab
FSFazal E. Subhan
Fazal E. Subhan
AKAdnan Khan
Adnan Khan
SKSultan Daud Khan
Sultan Daud Khan
MAMuhammad Shakeel Ahmad
Muhammad Shakeel Ahmad
MNMuhammad Noman
Muhammad Noman

3 October 2019 in Coatings
Verified
Journal Article
Open access
AKAimal Daud Khan
Aimal Daud Khan
QRQandeel Rehman
Qandeel Rehman
AKAdnan Khan
Adnan Khan
FSFazal E. Subhan
Fazal E. Subhan
MNMuhammad Noman
Muhammad Noman
HKHaseeb Ahmad Khan
Haseeb Ahmad Khan
Improving the light absorption in thin-film solar cell is essential for enhancing efficiency and reducing cost. Here, we propose an ultra-broadband amorphous silicon solar cell based on a periodic array of titanium ring-shaped metasurfaces, which achieves more than 90% absorptance in the visible range of the solar spectrum. The surface plasmon resonance supported by the nanoparticles together with the resonance induced by the metal–insulator–metal Fabry–Perot cavity leads to this broadband absorption. The impact of various materials of functional layers and the geometric structure of the nanoparticle on absorption performance is discussed in detail, and super broadband resonance is achieved after optimization. Moreover, the optimized solar cell is tested for different solar incidence angles and it is found that the structure exhibits high absorption efficiency even at large angles. Thus, the proposed solar cell design may be beneficial for most of the photovoltaic applications.