15 September 2016 in ACS Energy Letters
22 August 2016 in Advanced Materials
7 September 2017 in ChemSusChem
Entirely low‐temperature solution‐processed (≤100 °C) planar p‐i‐n perovskite solar cells (PSCs) offer great potential for commercialization of roll‐to‐roll fabricated photovoltaic devices. However, the stable inorganic hole‐transporting layer (HTL) in PSCs is usually processed at high temperature (200–500 °C), which is far beyond the tolerant temperature (≤150 °C) of roll‐to‐roll fabrication. In this context, inorganic NiOx nanoparticles (NPs) are an excellent candidate to serve as the HTL in PSCs, owing to their excellent solution processability at room temperature. However, the low‐temperature processing condition is usually accompanied with defect formation, which deteriorates the film quality and device efficiency to a large extent. To suppress this setback, we used a series of benzoic acid selfassembled monolayers (SAMs) to passivate the surface defects of the NiOx NPs and found that 4‐bromobenzoic acid could effectively play the role of the surface passivation. This SAM layer reduces the trap‐assisted recombination, minimizes the energy offset between the NiOx NPs and perovskite, and changes the HTL surface wettability, thus enhancing the perovskite crystallization, resulting in more stable PSCs with enhanced power conversion efficiency (PCE) of 18.4 %, exceeding the control device PCE (15.5 %). Also, we incorporated the above‐mentioned SAMs into flexible PSCs (F‐PSCs) and achieved one of the highest PCE of 16.2 % on a polyethylene terephthalate (PET) substrate with a remarkable power‐per‐weight of 26.9 W g−1. This facile interfacial engineering method offers great potential for the large‐scale manufacturing and commercialization of PSCs.
6 April 2017 in Nano Letters
Controlled doping for adjustable material polarity and charge carrier concentration is the basis of semiconductor materials and devices, and it is much more difficult to achieve in ionic semiconductors (e.g., ZnO and GaN) than in covalent semiconductors (e.g., Si and Ge), due to the high intrinsic defect density in ionic semiconductors. The organic–inorganic perovskite material, which is frenetically being researched for applications in solar cells and beyond, is also an ionic semiconductor. Here we present the Ag-incorporated organic–inorganic perovskite films and planar heterojunction solar cells. Partial substitution of Pb2+ by Ag+ leads to improved film morphology, crystallinity, and carrier dynamics as well as shifted Fermi level and reduced electron concentration. Consequently, in planar heterojunction photovoltaic devices with inverted stacking structure, Ag incorporation results in an enhancement of the power conversion efficiency from 16.0% to 18.4% in MAPbI3 based devices and from 11.2% to 15.4% in MAPbI3–xClx based devices. Our work implies that Ag incorporation is a feasible route to adjust carrier concentrations in solution-processed perovskite materials in spite of the high concentration of intrinsic defects.
16 May 2017 in Advanced Functional Materials
1 December 2016 in Nano Energy