Beam dynamics simulations of the proposed Rare Isotope Accelerator (RIA) driver linac have been done. The RIA driver linac is designed to accelerate stable ion beams from proton to uranium to final energies of 400 MeV/u for the heaviest and about 900 MeV/u for the lightest ions with beam powers of 100 to 400 kW. Two stripping sections are used to increase the charge state of heavy ions and minimize the total accelerating voltage required. To achieve the final beam power and to reduce the ion source requirements, multi-charge state beam acceleration is used. Multi-spoke structures in the high-energy part of the driver linac have been proposed as an alternative to the baseline design of 6-cell elliptical structures. A comparative analysis of this alternative is explored including beam dynamics, error constraints, and manufacturing issues.
1 July 2006 in Physica C: Superconductivity and its Applications
Studies of plasma processing for reduction of field emission in quarter-wave resonator (QWR) cryomodules are underway at the Facility for Rare Isotope Beams (FRIB), where a total of 104 QWRs are presently in operation. Driving the plasma with a higher-order mode allows for less mismatch at the fundamental power coupler and higher plasma density. The first plasma processing trial for FRIB QWRs in a cryomodule was conducted in January 2024. In-bunker cold tests of the cryomodule showed a significant reduction in field emission x-rays after plasma processing.
10 March 2026 in Physical Review Accelerators and Beams
A development effort to improve the performance of superconducting radio-frequency half-wave resonators (SRF HWRs) is underway at the Facility for Rare Isotope Beams (FRIB), where 220 such resonators are in operation. Our goal was to achieve an intrinsic quality factor ( Q 0 ) of ≥ 2 × 10 10 at an accelerating gradient ( E acc ) of 12 MV / m . FRIB production resonators were prepared with buffered chemical polishing. First trials of electropolishing (EP) and post-EP low-temperature baking of FRIB HWRs allowed us to reach higher gradient (15 MV/m, limited by quench) with a higher quality factor at high gradient, but Q 0 was still below our goal. Trapped magnetic flux during the Dewar test was found to be a source of Q 0 reduction. Three strategies were used to reduce the trapped flux: (i) adding a local magnetic shield (LMGS) to supplement the “global” magnetic shield around the Dewar for reduction of the ambient magnetic field; (ii) performing a “uniform cooldown” (UC) to reduce the thermoelectric currents; and (iii) using a compensation coil to further reduce the ambient field with active field cancellation (AFC). The LMGS improved the Q 0 , but not enough to reach our goal. With UC and AFC, we exceeded our goal, reaching Q 0 = 2.8 × 10 10 at E acc = 12 MV / m .