An experimental study on the effect of weather conditions such as solar radiation, humidity, temperature, and rain on the Long Range (LoRa) communication in a tropical region (Malaysia) via a campus environment has been carried out and analyzed. The weather parameters were obtained from an online meteorological weather station (Meteoblue) and the use of a local automatic weather station. A temperature sensor was attached to the LoRa node to measure the onboard temperature. We analyze the diurnal variation and the effects of the weather condition based on the LoRa link in a LoRaWAN setup. A regular pattern of RSSI was observed with stronger RSSI values having a positive correlation with the atmospheric temperature, onboard temperature, and solar radiation during the day but degrades in late evenings. The positive correlation and pattern observed can be attributed to the prevailing metrological conditions and opens room for further research needed for propagation modeling. The RSSI signals and relative humidity, on the other hand, showed no correlation. Furthermore, strong RSSI signals were obtained when the atmospheric temperature was between 30 - 40 °C, and the onboard temperature between 40 - 50 °C. No significant impact was observed on the RSSI signals when the rainfall rates vary from 12 mm/h to 180 mm/h. The study presents useful information to be considered on the effects of weather conditions in the propagation model and deployment of LoRa for IoT communication.
1 January 2018 in Computers and Electrical Engineering
This paper presents a novel structure design of Gigahertz Transverse Electromagnetic (GTEM) cell for EMC test in the RF & Microwave laboratory, National Institute of Metrology, Thailand (NIMT). The aim is to design a GTEM cell with a size of 1.1m × 2.1m × 0.8m (W×L×H) over a frequency range of 40 MHz to 1 GHz. The ferrite tile absorbers for EMC test in anechoic chamber are mounted on the inner surfaces of GTEM cell to improve RF absorption. All GTEM cell components are designed based on the finite-difference time-domain (FDTD) method using Computer Simulation Technology (CST) design studio. The field uniformity and electric-fields, very important parameters of the GTEM cell, are simulated and compared to the IEC 61000-4-20 standards. Finally, the testing volume below the septum is determined regarding its field uniformity.
More recently, a centralized traffic-aware scheduling algorithm(TASA)for IEEE 802. 15.4e time slotted channel hopping (TSCH) has been proposed that yields a low latency scheduling mechanism compared to existing scheduling algorithms. TASA employs an attractive scheduling approach with the aid of network topology and global information. In this paper, we investigate the effects of creating the schedule only using the local information in the network. The communication reliability of the proposed algorithms is evaluated in terms of packet delivery ratio and end-to-end delay. Simulation results show that the proposed scheduling algorithms based on local information can achieve the same performance as TASA with global information.
This paper presents a design of compact multiband L-shaped slot antenna using complementary split ring resonator (CSRR) for Wireless Local Area (WLAN) applications. The aim of this paper is to design a very small-profile antenna (less than 20×25mm 2 ) that can operate in multi-band frequency ranges around 2.4GHz and 5.2GHz. By etching F-shaped slots on each radiator side of rectangular-patch antenna on circular-shaped ground plane, a multi-band antenna can be achieved and the operation frequencies can be tuned via the F-shape slot geometry. Furthermore, a concept of CSRR (two-dimensional artificial structure) is applied on the circular-shaped ground plane by forming complementary split ring resonators on the copper surface. With this structure, the values of permittivity (ϵ) and permeability (μ) can be negative at the designed frequencies and consequently the size of antenna could be significantly reduced to almost 60%. The antenna is designed using the time domain CST Microwave Studio (MWS) simulator.