1 April 2014 in Powder Technology
30 April 2019 in Fibres & Textiles in Eastern Europe
31 October 2018 in Fibres & Textiles in Eastern Europe
The research presented in this paper focuses on determination of the physical and mechanical properties of composites made on the basis of natural polymer, i.e., crushed collagen fibres which are waste from the leather industry. Mineral supplements such as dolomite, bentonite and kaolin were the filling of the composite produced. Their application was dictated by increasing the application range, and we strove to optimise the composition of the composite in terms of physical and mechanical properties determined in static tensile tests. An analysis of the water absorption capacity was also carried out in order to select optimal compositions which have the best properties. The test results indicate extensive application possibilities of the composites produced, one of which is in footwear insoles, whose quality is an important element determining the hygienic qualities of shoes due to the high density of sweat glands in the plantar part of the foot. This research indicates the possibility of individual development of the composite properties of collagen fibres and mineral supplements in terms of their application, taking into account the medical aspect.
26 February 2016 in Granular Matter
This paper addresses the process of sieve holes blocking taking place while screening fine-particulate materials and provides an analytical description of the phenomenon. Empirical tests performed as part of this research provided dependences specifying the parameters of sieve holes blocking that could be applied in practice. The process of sieve holes blocking is unfavourable and inevitable. It is related with the screen clearance coefficient which is one of the fundamental characteristics of all screens. The grains whose dimensions are similar to the dimensions of the sieve holes block those holes, causing their exclusion from the active surface area of the screen. This phenomenon results in diminished performance and efficiency of the screening process. Screening is a very common industrial practice, and various designs of screens and types of sieves are available. That is why the subject of this paper is so important. The screen blocking coefficient is the measure of sieve holes blocking. In order to describe the process of screen blocking, a mathematical model is presented and a method for determining the screen blocking coefficient is proposed. Furthermore, the authors list the factors that have a significant influence on the degree of sieve holes blocking, i.e. the shape of the screened material, the toss indicator and the content of hard-to-screen grains in the feed. This paper is the first one to have thoroughly described the issue of screen blocking.
5 October 2017 in PRZEMYSŁ CHEMICZNY