Department of Leather Products Engineering, Institute of Leather Engineering and Technology, University of Dhaka, 44-50, Hazaribagh, Dhaka 1209, Bangladesh
Auto-generated profile, based on publicly available information
Fatema- Tuj- Zohra
Department of Leather Products Engineering, Institute of Leather Engineering and Technology, University of Dhaka, 44-50, Hazaribagh, Dhaka 1209, Bangladesh
Environmental issues are nowadays the prime concern worldwide for leather industries due to chrome containing solid and liquid wastes generated from the tannery. Therefore, experts are being encouraged in exploring alternative tanning agents. This study aimed at applying a novel vegetable tanning agent extracted from Xylocarpus granatum barks for the production of semi-chrome (SC) and chrome retanned (CR) leathers to reduce chromium use. Characterization of the SC and CR leathers was performed by Fourier Transform Infrared (FTIR) spectroscopy which revealed prominent tanning activity of the extracted tannins. The tanned leathers exhibited shrinkage temperatures of 112˚C for SC and 103˚C for CR leathers. The physicomechanical properties were found as tensile strength >230 kg/cm2, tear strength >30 kg/cm, grain cracking load >20 kg, distention at grain crack >7 mm, ball bursting load >38 kg, and distention at ball bursting >12mm that was comparatively acceptable according to UNIDO standard for shoe upper leathers.
26 December 2011 in Journal of Scientific Research
In this study, the prepared bio-adsorbents from Labeo rohita fishbones were used to remove the anionic acid dye Melioderm HF (High Fastness) Brown G (MHFB) from the aqueous solution. Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) were used to analyze the morphology and chemical composition of fishbone powder (FBP) before and after MHFB dye adsorption. In a batch experiment, factors such as initial dye concentration (100–250 mg/mL), contact time (5–180 min), pH of the solution (2.0–8.0), and the adsorbent dosage (1.0–3.5 g/L) were analyzed for their impact on the dye adsorption process. The batch experiments were studied to evaluate the influence of different operational variables such as pH, adsorbent dosage, contact time, and initial concentration of dye and were found optimum at 2, 2 g/L, 120 min, and 200 ppm, respectively, for maximum dye removal (98.33%) at ambient temperature (298 K). The isotherm models demonstrated that dye molecules were adsorbed heterogeneously in multilayer following the Freundlich isotherm (R2 = 0.9300). The data were fitted for pseudo-second-order kinetics. Thus, L. rohita fishbone could be used as a bio-adsorbent to remove anionic dye from tannery effluents at a minimal cost.
4 September 2023 in Journal of Dispersion Science and Technology