17 April 2026 in Food systems
Given the growing interest in natural beetroot betalains, the production of natural pigments of this class is a pressing issue. Concentrates produced from beetroot juice are in demand in the food, pharmaceutical, and medical industries. The properties specified by industry consumers require a stable system during long-term storage, preserving betanin, which has antioxidant activity. The stabilizing properties of citric acid (0.5%) and a mixture of citric (0.25%) and ascorbic (0.25%) acids on the optical properties of Bordeaux‑237 beet juice were studied during concentration and subsequent storage at 4±0.5°C using chemical analysis, electron microscopy, and Fourier transform infrared spectroscopy. The influence of the nature of the stabilizing agents on the kinetics of changes in betanin content and the composition of protein-carbohydrate components during beet juice concentration was determined. It was found that the nature of the stabilizer exerts a stabilizing effect on betanin, even with minor changes in beetroot juice pH during concentration. The increase in betanin content relative to the sample without the stabilizer (0.20%) reached 0.39% in the juice sample with citric acid and 0.35% in the juice sample stabilized with citric and ascorbic acids. The addition of citric acid significantly altered the concentration kinetics. As the 540 nm band maximum shifted to 535 nm, the 490 nm band decreased in intensity, and the weaker 455 nm band became more prominent. Betanin degradation in beetroot juice concentrates was determined to depend on concentration time. The change in spectral characteristics with concentration time is characterized by a delay of up to 10 minutes, followed by a sharp increase. The best system performance is achieved with a 15‑minute concentration at a temperature of 60±0.2°C and a pressure of 72±10 mbar. The minimum betanin loss in concentrates stabilized with citric acid after four months of refrigerated storage at 4±0.5°C was 5%.
1 July 2025 in Food Processing: Techniques and Technology
Sunflower meal with its valuable chemical composition is a popular animal feed ingredient. However, it is also high on fiber. Mechanical fractionation can reduce the fiber content and improve the functional and technological properties of sunflower meal. This research introduces a new sunflower meal protein with improved functional and technological properties to be used in functional foods. The study involved two samples of Russian sunflower meal and two types of flour, i.e., wheat and amaranth. The mechanical fractionation was conducted by three different methods: with a disintegrator, a rotor-knife, and a cam mill. A set of standard methods made it possible to determine the chemical, functional, and technological profiles of the samples. The sensory assessment (5-point scale) of the final confectionery products (cupcakes) included the appearance, taste, aroma, and texture. The amount of protein in the fine fraction of the sunflower meal depended on its content in the original raw material. The mass fraction and the mass yield of crude protein depended on the grinding method. As a result, protein and fiber were distributed across fractions in different particle sizes. The fractions obtained demonstrated high water-binding and fat-retaining properties. The flour mixes with sunflower meal showed a greater water-binding capacity. The optimal fraction of sunflower meal was rich in protein (44%) but had a low fiber content (13%) and an admirable water-binding capacity (455%). The particle size of this fraction (≤ 250 μm) was the same as that of wheat flour. The finished flour products had a greater volume and increased protein content. The optimal dose for the cupcake formulation was 5% of the flour mix weight. The method of mechanical fractionation made it possible to convert sunflower meal into protein to fortify functional flour products.