A highly sensitive fibre Bragg grating (FBG) geophone with temperature insensitivity has been developed for low-frequency seismic detection. This geophone utilizes a rubber-based diaphragm combined with a differential FBG technique to enhance vibrational sensitivity and eliminate temperature effects. This innovative method achieves a high vibrational sensitivity of 169.71 pm/g across a frequency range of 1 to 36 Hz while a low temperature sensitivity of 1.21 pm/°C is obtained over the range of 10 °C to 40 °C. Frequency spectrum comparisons demonstrate that the FBG geophone performs comparably to conventional electrical geophones.
Measuring low-frequency signals is essential for comprehensive monitoring in oil and gas fields as well as for structural health assessments. This article introduces a cutting-edge FBG geophone with a rubber-based diaphragm structure. The structure performance was evaluated by varying diameters from 25 mm to 55 mm, thickness from 0.8 mm to 1.4 mm and mass from 0.1 gm to 3 gm. The present study aims to achieve the highest vibrational sensitivity and the lowest natural frequency. Diaphragm diameter and mass exhibited a direct correlation with sensitivity while showing an inverse relationship with the sensor’s natural frequency. In the seismic frequency range of 5 to 30 Hz, the optimal parameters for the rubber-based diaphragm were identified as a mass of 1 gm, a thickness of 1 mm and a diameter of 45 mm, yielding a sensitivity of 89.44 pm/g and a natural frequency of 39.39 Hz. At these parameters, the temperature sensitivity was also 15.67 pm/°C. The error in sensitivity and natural frequency between the finite element analysis (FEA), experimental results, and theoretical modeling was less than 10%, highlighting the high predictability of the FEA and experimental model with theoretical modeling. A geophone with this type of performance has significant potential for advancing low-frequency seismic exploration within the oil and gas industry.
1 January 2013 in International Journal of Computer and Communication Engineering
The production database are transactions intensive transactions can be insert, update on the tables, failover is the replica of the production server, if there is any change we have to implement on the production and it will be automatically implemented on failover or standby database. Now a days the data on the production server is increasing and we need extra storage space on production server to keep data and this is same required on the failover. To generate reports from that data will increase load on the production server and can affect the performance of the server. There are also some threats which can cause loss of data from which we have to protect our database like Hardware failure, loss of machine. Replication is one of the methods for Backup of the running database and its immediate failover during failure. This paper represents some parts for the replication techniques, failover, and transaction states