State Key Laboratory of Mining Disaster Prevention and Control Co-Founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao 266590, China
Auto-generated profile, based on publicly available information
Chen Wang
State Key Laboratory of Mining Disaster Prevention and Control Co-Founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao 266590, China
In coal-bed methane recovery, water is generally drained out along with gas. In order to address the influence of different gas-water ratios, fracture intersecting angles, and gas desorption positions on gas and water distributions along fractures and hence understand the two-phase flow behavior in fracture network, an experimental study was conducted on three artificial models with intersecting fractures. The results show that (1) with gas and water injected at different rates, the flow of water and gas is divided into three stages. In the first stage, gas flowed as small bubbles. The transport of gas was stable, which was similar to single-phase laminar flow. The difference in gas injection positions led to totally contrary flow results of water and gas. (2) In the second stage, larger gas bubbles were formed and the interactions between water and gas became serious. The gas-water distribution was dominated by different inertias between water and gas. The difference in gas injection positions did not take much effect on the gas-water distribution. (3) In the third stage, the influence of the inertia difference was still important, but some other factors also influenced the gas-water distribution. The difference in gas injection positions led to different distribution results. (4) The water injection rate has impact on the distribution of the water flow rate in each outlet. In the second stage, when water was injected at small rates, the difference between the cases in which gas was injected from different positions can be neglected. When water injection rates became larger, this difference became obvious. (5) The intersecting angle of the fractures influences the distribution of water and gas. The larger the intersecting angle is, the larger the inertial effect will be. Consequently, the intersecting angle influences the length of the second stage, which is dominated by the inertial effect.
1 October 2021 in IOP Conference Series: Earth and Environmental Science
An appropriate understanding of the hydraulic characteristics of the two-phase flow in the rock fracture network is important in many engineering applications. To investigate the two-phase flow in the fracture network, a study on the two-phase flow characteristics in the intersecting fractures is necessary. In order to describe the two-phase flow in the intersecting fractures quantitatively, in this study, a gas-water two-phase flow experiment was conducted in a smooth 3D model with intersecting fractures. The results in this specific 3D model show that the flow structures in the intersecting fractures were similar to those of the stratified wavy flow in pipes. The nonlinearity induced by inertial force and turbulence in the intersecting fractures cannot be neglected in the two-phase flow, and the Martinelli-Lockhart model is effective for the two-phase flow in intersecting fractures. Delhaye’s model can be adapted for the cases in this experiment. The turbulence of the flow can be indicated by the values of in Delhaye’s model, but resetting the appropriate range of the values of is necessary.