Zhen Wang

Zhen Wang

Auto-generated profile, based on publicly available information

Zhen Wang

Hebei Semiconductor Research Institute, Shijiazhuang, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 November 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
XWXiaozhu Wen
Xiaozhu Wen
YYYang Yu
Yang Yu
GSGuanghua Shi
Guanghua Shi
ZWZhen Wang
Zhen Wang
QCQingsha Cheng
Qingsha Cheng
Cheng GuoCheng Guo
Cheng Guo
This article presents a waveguide with a pair of E -plane bends and two waveguide bandpass filters (BPFs) which operate in WR-3.4 band (220–330 GHz). These devices are fabricated by a micro metal additive manufacturing (M-MAM) technology on copper in one piece. Both filters are fifth order and operate at a center frequency of 280 GHz with a bandwidth of 8 GHz. Cylindrical resonators are employed for filter design. The standard feed waveguides are designed in bend structures, facilitating the measurements. The M-MAM technology is a layer-by-layer additive manufacturing process constructing the waveguide devices in five layers. Since the layout of the devices has a strong impact on the electrostatic field distributions and hence the electroforming quality, both full-wave electromagnetic (EM) simulations and electrostatic analysis are simultaneously considered in the device design. It eases the subsequent electroforming and polishing processes, effectively improving the performance of the devices. The insertion losses and return losses of the measured filters are lower than 1.65 dB and better than 15 dB. The center frequency shifts are less than 0.3%. The excellent results attribute to the delicate co-design method between EM and electrostatic analyses encountered both in the filter design and in the additive manufacturing process.

12 July 2024 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
XZXinrui Zhong
Xinrui Zhong
Qinlong LiQinlong Li
Qinlong Li
Cheng GuoCheng Guo
Cheng Guo
JLJianxing Li
Jianxing Li
ZWZhen Wang
Zhen Wang
AZAnxue Zhang
Anxue Zhang
A wideband magnetoelectric (ME) dipole antenna fed by rectangular micro-coaxial line (RMCL) is proposed based on micro-metal additive manufacturing (M-MAM) technology. A pair of planar patches and vertical walls are designed to realize electric dipole and magnetic dipole. A direct-feeding structure based on RMCL is developed to excite the ME dipole antenna. Also, a slotted cavity around the ME dipole antenna is used to enhance antenna gain and impedance bandwidth (IMBW), simultaneously. The proposed antenna is designed in according with the fabrication process of M-MAM, and covers the D-band of 110 to 170 GHz. Furthermore, an 8×8 high-gain ME dipole antenna array is designed based on the proposed antenna using M-MAM technology. Duo to the use of RMCL, the bandwidth of feed network of the array can cover the whole D-band. The ME dipole antenna array based on M-MAM is fabricated and measured. A wide IMBW of 110 to 170 GHz and a boresight gain varying from 21.1 to 25.6 dBi are obtained in the measurements, which show excellent agreement with simulation results.

26 July 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
HYHaodong Yang
Haodong Yang
XWXiaozhu Wen
Xiaozhu Wen
YYYang Yu
Yang Yu
GSGuanghua Shi
Guanghua Shi
ZWZhen Wang
Zhen Wang
Cheng GuoCheng Guo
Cheng Guo
This paper presents a D-band waveguide diplexer fabricated using micro metal additive manufacturing (M-MAM) technology. The diplexer features two sixth-order filters with passbands of 130-134 GHz and 141-148.5 GHz, respectively, for a crucial RF application band. Cylindrical resonators were employed in the filter design, and a 9-layer process was developed specifically for this frequency band, allowing the diplexer to be manufactured as a single piece. The process was optimized to minimize photo-resist deformation during repeated thermal cycles, so a larger waveguide can be fabricated. To ensure accurate measurements, a fixture equipped with a straight-through calibration channel was also designed and manufactured. The measured insertion losses and return losses of both channels are less than 2 dB and greater than 15 dB, respectively, and the center frequency shifts are negligible at less than 0.15%. The excellent correlation between simulations and measurements is a result of the carefully designed process and its high level of accuracy.

13 October 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
WWWenxuan Wu
Wenxuan Wu
BLBingkai Liu
Bingkai Liu
PHPu He
Pu He
XWXiaozhu Wen
Xiaozhu Wen
HYHaodong Yang
Haodong Yang
Cheng GuoCheng Guo
Cheng Guo
In this article, we present a new type of waveguide ground-signal-ground (GSG) probe for millimeter-wave (mmWave) on-wafer measurements. The proposed design integrates a GSG tip, a microcoaxial transmission line (TL), and a waveguide-to-coaxial transition in one structure. The waveguide port of the probe can be inserted into a section of the rectangular waveguide and then directly connected with the vector network analyzer (VNA). To optimize the contact force between the probe tip and the device under test (DUT), the inner and outer conductors of the GSG tip are designed to have different heights. To verify the performance of the proposed design, a W-band (75–110 GHz) prototype is fabricated based on the micrometal additive manufacturing (AM) technology. Due to the unique characteristics of AM technology, the probes can be fabricated in one piece and need no assembly, which significantly reduces the manufacturing cost and eases probe maintenance and repair. The measured results show 0.65–0.90-dB insert loss and over 15-dB return loss (RL) within the whole operating bandwidth, which validates the design mechanism and shows great potential for future economic subterahertz (THz) on-wafer measurements.

14 March 2023 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
XWXiaozhu Wen
Xiaozhu Wen
HYHaodong Yang
Haodong Yang
ZWZixian Wu
Zixian Wu
YYYang Yu
Yang Yu
GSGuanghua Shi
Guanghua Shi
Cheng GuoCheng Guo
Cheng Guo
This article presents a wideband coaxial D-band frequency tripler fabricated by copper additive manufacturing (AM). The central part of the tripler consists of two waveguide–coaxial transitions, a coaxial low-pass filter, an antiparallel Schottky diode chip, and an output impedance matching network. Most constitutions, except for the diode chip, are monolithically fabricated in one piece. The diode chip with additional thermal paths is specially designed to obtain a good thermal performance and better power handling. To facilitate the measurement, a waveguide fixture is also designed to convert the ports to standard waveguide ports (WR-19 and WR-6.5). The measurements show that the maximum output power of the tripler is 9.44 mW with about 182 mW of input power at 147 GHz and its 3-dB bandwidth is 45.2% from 108 to 171 GHz. Additionally, the tripler delivers $>$ 1.87 mW of output power and better than 10 dB of return loss over the 100–180-GHz range. To the best of authors’ knowledge, this is the first AM coaxial ultra-wideband frequency multiplier reported in the open literature.

2 October 2023 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
RLRuihua Liang
Ruihua Liang
Cheng GuoCheng Guo
Cheng Guo
GSGuanghua Shi
Guanghua Shi
ZWZhen Wang
Zhen Wang
QYQian Yang
Qian Yang
AZAnxue Zhang
Anxue Zhang
This letter presents a $W$ -band bandpass filter (BPF) with multiple transmission zeros (TZs) based on additively manufactured rectangular micro-coaxial lines (MCLs). Compared to common simple dual behavior resonators (DBRs), the mixed open-short-circuited DBR used in this work creates a pair of TZs nearer to the passband at both sides of the passband. Hence, the maximum 2 $N$ TZs can be obtained for such an $N$ th-order filter without any cross-coupling. A new ordering strategy of DBRs is introduced to realize the design within a significantly limited admittance range of the MCL. As an example, a fourth-order filter with a center frequency of 90 GHz and a fractional bandwidth of 10% is designed, fabricated, and measured. Excellent agreement between simulated and measured results is achieved. The measured passband return loss is better than 15 dB, and the minimum insertion loss (IL) is 1.2 dB. Eight TZs can be obtained, resulting in an excellent roll-off rate and out-of-band rejection.