Taeho Seong

Taeho Seong

Auto-generated profile, based on publicly available information

Taeho Seong

QUALCOMM Inc., San Diego, CA, USA

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 January 2022 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
CHChanwoong Hwang
Chanwoong Hwang
HPHangi Park
Hangi Park
YLYongsun Lee
Yongsun Lee
TSTaeho Seong
Taeho Seong
JCJaehyouk Choi
Jaehyouk Choi
This work presents a low-jitter and low-spur, fractional- $N$ ring-oscillator-based digital phase-locked loop (RO-DPLL). First, to suppress fractional spurs, the probability-density-shaping delta–sigma modulator (PDS- $\Delta \Sigma \text{M}$ ) is presented. Since the output codes of the PDS- $\Delta \Sigma \text{M}$ are designed to have a time-invariant probability density function (PDF), they have spur immunity to any nonlinearity (NL) of the digital-to-time converter (DTC). In addition, by using a special dither consisting of uniform random numbers (URNs) based on the dithered quantization theorems, the PDS- $\Delta \Sigma \text{M}$ can also suppress fractional spurs due to the NL of other loop-building circuits. Second, the DTC’s second-/third-order nonlinearity cancellation (DST-NLC) technique is presented to reduce the quantization noise (Q-noise), thereby reducing the rms jitter. The proposed RO-DPLL was fabricated in 65-nm CMOS, and it used a 0.146-mm 2 silicon area and 9.27-mW power. At a near-integer- $N$ frequency, i.e., near 5.3 GHz, the measured rms jitter and the fractional spur were less than 365 fs and −63 dBc, respectively.

16 November 2017 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
YLYongsun Lee
Yongsun Lee
TSTaeho Seong
Taeho Seong
SYSeyeon Yoo
Seyeon Yoo
JCJaehyouk Choi
Jaehyouk Choi
A low-jitter and low-reference-spur ring-type voltage-controlled oscillator (VCO)-based switched-loop filter (SLF) phase-locked loop (PLL) is presented. To enhance the capability of suppressing jitter of a VCO, we propose a fast phase-error correction (FPEC) technique that emulates the phase-realignment mechanism of an injection-locked clock multiplier. By the proposed FPEC technique, accumulated jitter of a VCO can be removed intensively in a short interval, thereby suppressing jitter dramatically. Based on a PLL topology having an intrinsic integrator in a VCO, the proposed architecture can also achieve a low reference spur despite a high multiplication factor (i.e., 64). This paper also presents the selective frequency-tuning technique used in the VCO that helps the proposed architecture further suppress the level of reference spur. The proposed PLL was fabricated in a 65-nm CMOS process. The measured rms jitter integrated from 1 kHz to 80 MHz and the reference spur of the output signal with a 3.008-GHz frequency were 357 fs and -71 dBc, respectively. The total active area was 0.047 mm², and the power consumption was 4.6 mW.

17 June 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
TSTaeho Seong
Taeho Seong
YLYongsun Lee
Yongsun Lee
SYSeyeon Yoo
Seyeon Yoo
JCJaehyouk Choi
Jaehyouk Choi

11 September 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
JKJuyeop Kim
Juyeop Kim
YLYounghyun Lim
Younghyun Lim
HYHeein Yoon
Heein Yoon
YLYongsun Lee
Yongsun Lee
HPHangi Park
Hangi Park
JCJaehyouk Choi
Jaehyouk Choi
This article presents a cascaded architecture of a frequency synthesizer to generate ultra-low-jitter output signals in a millimeter-wave (mmW) frequency band from 28 to 31 GHz. The mmW-band injection-locked frequency multiplier (ILFM) placed at the second stage has a wide bandwidth so that the performance of the jitter of this frequency synthesizer is determined by the GHz-band, digital subsampling phase-locked loop (SSPLL) at the first stage. To suppress the quantization noise of the digital SSPLL while using a small amount of power, the optimally spaced voltage comparators (OSVCs) are presented as a voltage quantizer. This article was designed and fabricated using 65-nm CMOS technology. In measurements, this prototype frequency synthesizer generated output signals in the range of 28-31 GHz, with an rms jitter of less than 80 fs and an integrated phase noise (IPN) of less than -40 dBc. The active silicon area was 0.32 mm 2 , and the total power consumption was 41.8 mW.

1 August 2023 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
JKJuyeop Kim
Juyeop Kim
YJYongwoo Jo
Yongwoo Jo
HPHangi Park
Hangi Park
TSTaeho Seong
Taeho Seong
YLYounghyun Lim
Younghyun Lim
JCJaehyouk Choi
Jaehyouk Choi
This article presents a low-jitter, low-fractional spur fractional- $N$ subsampling phase-locked loop (SSPLL) that generates an output frequency, $f_{\mathrm{OUT}}$ , that ranges from 12.8 to 15.0 GHz. Conventionally, fractional- $N$ SSPLLs remove the quantization error (Q-error) of the delta–sigma modulator ( $\Delta \Sigma$ M) before the sample-and-hold (SH) circuit using a digital-to-time converter (DTC). As a result, the in-band noise of those SSPLLs is saturated by the jitter of the DTC, and the overall rms jitter is increased. However, the proposed SSPLL cancels the Q-error after the SH using a digital-to-analog converter (DAC). This approach significantly suppresses the jitter of the DAC by the gain of the SH, $K_{\mathrm{SH}}$ , resulting in a much lower rms jitter. To implement the proposed Q-error cancellation, this work introduces two key techniques: 1) dual-clock-phase sampling (DCP sampling) that maintains a consistently high $K_{\mathrm{SH}}$ and 2) second-order curve-fitting digital predistortion (SCF-DPD) that enables the DAC to cancel the Q-error more precisely. The proposed fractional- $N$ SSPLL was fabricated in a 65-nm CMOS technology, and the total power consumption was 7.3 mW when a 14-GHz $f_{\mathrm{OUT}}$ was generated using a reference frequency of 100 MHz. The measured rms jitter and the level of fractional spurs were 104 fs and $-$ 58 dBc, respectively.

31 August 2022 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
HPHangi Park
Hangi Park
CHChanwoong Hwang
Chanwoong Hwang
TSTaeho Seong
Taeho Seong
JCJaehyouk Choi
Jaehyouk Choi
This work presents a fractional- $N$ ring-oscillator (RO)-based digital phase-locked loop (DPLL). To achieve ultralow jitter, the proposed RO-DPLL used a technique to reduce the dominant source of in-band noise, i.e., the thermal noise of the digital-to-time converters (DTCs). A key building block of this technique is the quadruple-timing-margin phase selector (QTM-PS) that dynamically selects the proper phase among the eight phases of the RO, effectively reducing the required dynamic range of the DTCs and, thus, suppressing the thermal noise significantly. Based on the reduced in-band noise, the dual-edge generator (DEG) doubles the bandwidth of the DPLL, further suppressing the jitter of the RO. The integrated background calibrator (IBC) that can perform multiple least mean squares (LMS)-based calibrations was used to guarantee the stable operation and performance of both the QTM-PS and the DEG. The proposed RO-DPLL was fabricated in 65-nm CMOS, and it used 0.139-mm $^{2}$ silicon area and 15.67-mW power. At a fractional- $N$ frequency near 5.2 GHz, the rms jitter and the figure of merit (FoM) of the output signal were 188 fs and –243 dB, respectively.