This study concerns a magnetorheological elastomer (MRE) consisting of a magnetically hard powder and a stiff polymer matrix, so called STH–MRE. This material exhibits some strong constitutive differences with the behavior of MRE based on soft polymer matrix and magnetically hard powder (SOH–MRE). This paper presents a manufacturing process for such a STH–MRE, describes testing procedures to get the magnetic properties, the viscoelastic behavior and the magneto-mechanical coupling generated by the remanent magnetization, and shares the STH–MRE properties with the scientific community. Firstly, the manufacturing process is detailed. Then, the homogenized magnetic properties and their dependence on the volume fraction and the temperature are discussed. Thereafter, dynamic mechanical analysis is explained and the viscoelastic properties are discussed considering the polymer matrix properties, the volume fraction and the temperature. Magneto-mechanical couplings are investigated in absence of an external magnetic field. The coercive field strength of composite material and powder are almost equal while the remanent flux density depends on volume fraction. The temperature dependence of the magnetic properties is given as well as homogenization rules. The viscoelastic data of the STH–MRE are provided in a large temperature range and in the mechanical vibration frequency range. The magneto-mechanical coupling due to the remanent magnetization is shown to be negligible.
29 July 2024 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
In this article, we present the design and experimental validation of a labyrinthine metamaterial for vibro-acoustic applications. Based on a two-dimensional unit cell, different designs of finite-size metamaterial specimens in a sandwich configuration including two plates are proposed. The design phase includes an optimization based on Bloch-Floquet analysis with the aims of maximizing the band gap and extruding the specimens in the third dimension while keeping the absorption properties almost unaffected. By manufacturing and experimentally testing finite-sized specimens, we assess their capacity to mitigate vibrations in vibro-impact tests. The experiments confirm a band gap in the low- to mid-frequency range. Numerical models are employed to validate the experiments and to examine additional vibro-acoustic load cases. The metamaterial’s performances are compared with benchmark solutions, usually employed for noise and vibration mitigation, showing a comparable efficacy in the band gap region. To eventually improve the metamaterial’s performance, we optimize its interaction with the air and test different types of connections between the metamaterial and the homogeneous plates. This finally leads to metamaterial samples largely exceeding the benchmark performances in the band gap region and reveals the potential of interfaces for performance optimization of composed structures. This article is part of the theme issue ‘Current developments in elastic and acoustic metamaterials science (Part 1)’.
Magneto-rheological elastomers belong to the class of smart materials whose mechanical properties can be controlled by an external magnetic field. These materials can be integrated into mechatronic systems and submitted to multiple loadings such as temperature, mechanical stress and magnetic field. Thus, the present work is dedicated to the development of a magneto-mechanical bench and on first experimental characterizations of hard magneto-rheological elastomers taking multiphysics coupling into account. Regarding the mechanical loading, the experimental setup is able to create a uniaxial tensile stress in case of low strain (< 1%) without friction effect. In regards to the magnetic loading, a magnetic circuit made of a strong permanent magnet has been designed to impose a variable and a homogeneous magnetic field strength up to 41 kA/m. Experimental analysis has been performed on silicone rubber filled with 36%vol. of NdFeB particles. The purpose was first to investigate the evolution of the Young modulus with or without magnetic field. Results obtained from measurements show that the developed test bench is able to depict the mechanical behavior and phenomena linked to rubber-like material.