Key Laboratory of Opto-Electronics Information Technology, Ministry of Education, School of Precision Instruments and Opto-Electronics Engineering, Tianjin University, Tianjin 300072, China
Auto-generated profile, based on publicly available information
Mengyao Li
Key Laboratory of Opto-Electronics Information Technology, Ministry of Education, School of Precision Instruments and Opto-Electronics Engineering, Tianjin University, Tianjin 300072, China
The performance of perovskite photodetectors (PPDs) is sensitive to the quality of their perovskite films. Solution-processed perovskite films suffer from excess lead halide and irregular nanocavities located at the buried interface, which result in a high dark current density and hinder the improvement of the PPD performance. Herein, we could govern the perovskite growth by introducing the modulating MAI molecule in the PbI2 precursor in a modified two-step spin-coating method. Consequently, we obtained a high-quality (large grain size, pinhole-free and well-packed) perovskite layer with uniform thickness. Also, we fabricated a photodiode-type PPD with a p–i–n configuration. At a reverse bias of −1.5 V, the optimum PPD achieved a high specific detectivity of up to 5 × 1011 Jones and a decent responsivity of 0.79 A W−1 under 532 nm laser irradiation with a light intensity of 1 μW cm−2. Meanwhile, it exhibited a fast response of 2.6 μs and 72.8 μs for the rise and fall times, respectively. This strategy enriches the approaches for preparing high-quality perovskite films for diverse perovskite optoelectronic devices.
Two-dimensional (2D) perovskites have shown more considerable advantages in terms of stability than their three-dimensional (3D) counterparts. However, the intrinsic poor light absorption and charge transport capacity impede the improvement of device performance. Herein a novel 2D perovskite material containing butylammonium acetate (BAAc) is firstly introduced to fabricate high-performance and stable 2D/3D stacked perovskite photodetectors (PPDs). With the in situ growth of BAAc, the defects on the surfaces and grain boundaries of regular 3D perovskite (3D-PSK) films are dramatically passivated, and the larger size of long-chain BA+ ions not only enhances the moisture stability but also improves the thermal stability of the 2D/3D stacked perovskite films and PPDs. As a result, the responsivity of the BAAc treated PPD (BAAc-PPD) reaches 2.11 A W−1 under the illumination of a 532 nm laser, and retains 78.5% of the initial value after 20 days of nonencapsulated storage at 10–15% relative humidity (RH). In addition, we successfully demonstrate the use of our PPDs in a visible light communication system. Our work provides a simple and effective method for the fabrication of high-performance and stable 2D/3D stacked PPDs, which has great application potential in visible light communication, imaging and environmental monitoring under complex environmental conditions.
High-sensitivity and fast-response photodetectors (PDs) are vital part of optical wireless communication (OWC) system. In this work, we develop an organic–inorganic hybrid perovskite material (MAPbI3) based p–i–n structured PD. By optimizing the precursor solution concertation, the PD showed a high responsivity of 0.98 A W−1, a fast response time trise/tfall of 12/12.5 μs, a specific detectivity of 2.62 × 1013 Jones, and the f−3dB of 24 kHz under the 532 nm laser and −0.2 V bias voltage. Furthermore, we designed an OWC system based on the prepared PD. With the baud rate of 19200 bps, the system exhibits a bit error rate less than 10−6, and it can realize 9.63 m long-distance communication and quick transmission applications such as strings, texts, photos, and audios. Our work demonstrates the great application potential of perovskite PDs in the field of optical communication.