1 May 2021 in Journal of Physics: Conference Series
Ductile damages often happen on metal structures under large deformations. In the current paper, the ductile damage criteria are discussed from the microscopic mechanism to metal ductile fracture models. Abaqus FEA makes the metal ductile damage criteria easy to be applied for practical problems. Therefore, the paper finally presents the detailed implementation of the ductile damage criteria in Abaqus FEA to describe the metal damage and degradation, simulating the ductile failure process with higher fidelity.
1 February 2020 in Journal of Engineering Mechanics
To evaluate short crack growth and fatigue damage accumulation in steel structures, efforts have been made based on a two-dimensional (2D) grain-based model for fatigue life assessment under variable amplitude loads. However, crack arrested in a 2D field could be problematic since the arrested 2D crack might propagate toward the out-of-plane direction. In addition, the pure plane stress/plain assumption in 2D simulation could not be applied to many complex stress states. In this paper, a three-dimensional (3D) fatigue damage estimation model is proposed based on a twofold nonlinear grain-based fatigue life assessment method. The persistent slip band based short fatigue crack growth model is implemented in this model combined with Miner’s rule for grain fatigue accumulation evaluations. Rain-flow counting method and the linear damage rule in grains are employed for fatigue damage growth within each grain. Meanwhile, in the grain and subgrain regime, the crack is assumed to nucleate and grow along with persistent slip bands. Also, an adjacent persistent slip band detection algorithm is developed to locate the potential crack propagation path. Therefore, fatigue damage is calculated grain by grain until the crack length reaches the characteristic length (such as over 0.1 mm), where linear elastic fracture mechanics (LEFM) thoery becomes more reliable. Sensitivity analysis is conducted for the number of grains and the element size in statistical volume element model under constant amplitude loads. Finally, a case study is performed to demonstrate the proposed method for variable amplitude loads, and the results are compared with the 2D model results in the literature.
23 July 2025 in Transportation Research Record: Journal of the Transportation Research Board
Cast-in-place (CIP) reinforced concrete (RC) box culverts are the most common type of culvert in the United States. As buried structures, the structural behavior of CIP RC box culverts under earth loads and vehicular live loads is not fully understood, and accurate load rating remains challenging. Relevant communities have conducted research and developed codes to achieve more realistic load ratings. This paper provides a comprehensive review of current guidelines, practices, and state-of-the-art research on load rating CIP RC box culverts. The review encompasses national standards, state procedures, standard plans, and publications from agencies and institutes. Additionally, commonly used structural analysis and rating software for culverts is introduced. The paper identifies and discusses key parameters and assumptions that affect load rating, and examines various analysis techniques, including 2-D analysis, 3-D analysis, and soil-structure interaction modeling. Using single-cell and multicell culvert examples, this paper conducts a study to quantify the influence of identified key parameters and analysis techniques, validating results from existing literature. The conclusion summarizes the findings, offers suggestions for load rating practices, and identifies areas requiring further investigation in future research.
1 December 2025 in Journal of Performance of Constructed Facilities