A model based on a system of balance equations for localised and continuum states is developed to calculate the current − voltage (I − V) and power characteristics of quantum-cascade lasers (QCLs) operating in the terahertz (THz) range. A method for modifying the eigenbasis of the Schrödinger equation by reducing the dipole moments of tunnel-coupled states is proposed to take into account the effect of dephasing on the carrier transport. The calculated and experimental data on the current − voltage characteristics and the dependence of the integrated radiation intensity on current for the THz QCLs lasing at 2.3 THz are compared. The calculated and measured values of the threshold current, lasing current range, and maximum operating temperature Tmax are found to be in good agreement. It is shown that Tmax can be increased by 25 % by reducing the thickness of the top contact layer n+-GaAs of the laser structure under study from 800 to 100 nm.
We report on the implementation of a terahertz two-photon quantum cascade laser operating in a continuous wave mode. Lasers that can emit two photons as a result of the relaxation of a single electron between two states of the same parity have been discussed since the early days of the laser era, but implementation has been hampered by the lack of a suitable gain medium. The semiconductor structure of a quantum cascade laser seems to be an ideal medium for realizing such two-photon emission. Our work demonstrates dual-band laser radiation in the range of 3.1–3.9 THz (104–130 cm−1) at temperatures up to 90 K.
A model for calculating the spatial distribution and decay time of electromagnetic modes in laser structures with a dielectric or metal diffraction grating parallel to the active layer is developed. Self-consistent calculation of the efficiency of vertical emission is performed taking into account backscattering and the interaction of scattered waves with substrate modes. The possibility of longitudinal mode selection as a result of the frequency dependence of the decay time without the use of distributed feedback is discussed.
We have demonstrated a quantum cascade laser (QCL) with a generation frequency of about 3.8 THz, grown by metal-organic vapor phase epitaxy. The multilayer heterostructure for QCLs consists of 185 repetitions of an active module containing four GaAs/Al0.15Ga0.85As quantum wells. The threshold current and threshold voltage of the fabricated QCL were 2.25 kA/cm2 and 19.7 V, respectively. The QCL oscillations were carried out in the multimode regime, and the detection of terahertz radiation continued with an increase in the laser temperature up to 60 K. Keywords: quantum cascade lasers, terahertz, metalorganic vapor phase epitaxy, quantum well, QCL, MOCVD, MOVPE.
We propose an electrically pumped laser diode based on multiple HgTe quantum wells with band structure engineered for Auger recombination suppression. A model for accounting for hot phonons is developed for calculating the nonequilibrium temperature of electrons and holes. Using a comprehensive model accounting for carrier drift and diffusion, Auger recombination, and hot-phonon effects, we predict of lasing at m at room temperature in the 2.1 nm HgTe/Cd Hg Te quantum well heterostructure. The output power in the pulse can reach up to 600 mW for 100 nanosecond-duration pulses.