Molybdenum disulfide nanosheets (MoS2 NSs) were prepared using a solvothermal synthesis approach. The synthesized MoS2 nanosheets were used to modify a screen-printed electrode (MoS2 NSs / SPE), which was then utilized as the working electrode for the voltammetric analysis of carmoisine. The MoS2 NSs / SPE demonstrated enhanced electrocatalytic activity towards the oxidation of carmoisine. The oxidation peak currents of carmoisine were found to be linearly proportional to its concentration over a range of 0.1 to 400.0 μM, with a detection limit as low as 0.03 μM under optimized conditions. The MoS2 NSs / SPE also demonstrated effective performance in detecting carmoisine even when tartrazine was present, indicating its potential for simultaneous determination of both compounds. The oxidation peak potentials of the two azo dyes were sufficiently separated by 200 mV, making the MoS2 NSs / SPE suitable for the simultaneous detection of carmoisine and tartrazine using differential pulse voltammetry.
23 February 2025 in Journal of Electrochemical Science and Engineering
In this paper, we describe the use of a screen-printed graphite electrode modified with a two-dimensional leaf-like zeolitic imidazolate framework-L (Zn), ZIF-L (Zn) for the deter¬mination of sulphite. We started by using linear sweep voltammetry to investigate the redox properties of the modified electrode at different scan rates (10 to 400 mV s-1). Next, we evaluated sulphite oxidation in the modified electrode. Using differential pulse voltammetry (DPV), the linear dynamic range of 0.04-900.0 µM and the limit of detection (3s/m) of 0.01 μM were obtained. DPV was also used to quantify sulphite in various real samples using the standard addition method.
Background and purpose: Calcium folinate is frequently co-administered with methotrexate and 5-fluorouracil in chemotherapeutic treatments to enhance therapeutic efficacy and reduce toxicity. Therefore, simple and accurate determination of calcium folinate in the presence of these agents is essential for therapeutic monitoring and pharmaceutical analysis. Experimental approach: The current work is focused on designing and developing a simple and sensitive modified screen-printed carbon electrode (SPCE)-based electrochemical sensor for the determination of calcium folinate in the presence of methotrexate and 5-fluorouracil. For this purpose, a nanostructure of UiO-66/CdS composite was prepared. Then, we used the prepared UiO-66/CdS composite to modify SPCE towards the development of an electrochemical sensing platform (UiO-66/ /CdS/SPCE). Key results: The cyclic voltammetry studies revealed that the UiO-66/CdS/SPCE could significantly improve the detection of calcium folinate with a higher response peak current at a lower overpotential compared to other SPCEs. Also, the UiO-66/CdS/SPCE sensor demonstrated a good ability in the quantitative determination of calcium folinate by the differential pulse voltammetry (DPV) method. Based on DPV measurements, a linearity plot was achieved for the concentration range of 0.1 to 300.0 µM calcium folinate with a limit of detection (LOD) of 0.04 µM and a high sensitivity of 0.0503 µA µM-1. Furthermore, the UiO-66/ /CdS/SPCE sensor showed three well-separated oxidation peaks for the simultaneous determination of calcium folinate, methotrexate, and 5-fluorouracil without interfering with each other. Finally, the UiO-66/CdS/SPCE sensor was used to detect calcium folinate, methotrexate, and 5-fluorouracil in real samples, and the values of recovery and relative standard deviation (RSD) were satisfactory. Conclusion: The results from this study show that the designed sensor can be used as an efficient and promising platform for the determination of these species.
Background and purpose: Dopamine has an impact on the cardiovascular, endocrine, renal, and central neurological systems. Electrochemical techniques are becoming more and more popular among researchers as a way to assess dopamine and uric acid levels. Experimental approach: Using electrochemical techniques, a new Universitet i Oslo MOF (UiO-66)-graphene oxide nanocomposite-modified carbon paste electrode was created to investigate the electrooxidation of uric acid and dopamine as well as their combinations. At the redesigned electrode, uric acid and dopamine were detected concurrently in a very sensitive way using differential pulse voltammetry (DPV). Key results: Dopamine DPV peak currents increase in a linear fashion at doses between 0.05 and 600.0 µM. Conclusion: Uric acid and dopamine levels in urine and dopamine injection samples may be determined with the help of the proposed sensor, which is reasonably priced and performs well.
Background and purpose: Sumatriptan is used to alleviate symptoms of migraine headaches, particularly during acute attacks. Naproxen is a medication that provides relief from pain, inflammation, and fever. Therefore, determination of them is important. Experimental approach: In the present work, CoMoO4 nanos¬heets were synthesized in a basic and easy way. A screen-printed graphite electrode's surface was altered using the as-prepared CoMoO4 nanosheets' high electroactivity to create a CoMoO4 nanosheets-modified screen-printed electrode (CoMoO4 NSs-SPE), which was then employed for sumatriptan's electrochemical oxidation. Due to the superior electron transfer characteristics and catalytic activity of the produced CoMoO4 nanosheets, the results demonstrated a notable improvement in sumatriptan's current responses. This study examined the electrochemical behavior of sumatriptan on the CoMoO4 NSs-SPE utilizing a number of methods, including as chronoamperometry, cyclic voltammetry, and differential pulse voltammetry (DPV). Key results: With a high sensitivity of 0.0718 μA/μM and a good correlation value of 0.9998, a linear calibration curve was obtained over a broad concentration range of 0.02-600.0 μM, suggesting a strong linear connection between the concentration and the response. Based on a signal-to-noise ratio of 3, the limit of detection for sumatriptan was determined to be 0.01 μM, suggesting a high degree of sensitivity for the detection technique. DPV results showed that the CoMoO4 nanosheets-modified screen-printed electrode (CoMoO4 NSs-SPE) could detect naproxen and sumatriptan at the same time. Conclusion: The created sensor's usefulness and efficacy in real-world applications were demonstrated when it was successfully used to identify the target analytes in actual samples.
1 May 2025 in Journal of Electrochemical Science and Engineering
In this work, a carbon paste electrode was modified with ionic liquids and NiMoO4 nanosheets (NMs/IL/CPE) for voltammetric epinine detection. The NMs/IL/CPE showed good electrocatalytic activity for epinine oxidation compared to unmodified CPE. The limit of detection is 0.05 μM, and under ideal circumstances, the oxidation peak currents of epinine show a linear relationship with epinine concentration from 0.1 to 300.0 μM. Additionally, when dobutamine was present, the NMs/IL/CPE showed good activity toward epinine determination. Its appropriateness for the simultaneous detection of these two medicines using differential pulse voltammetry is shown by the separation of the oxidation peak potentials of 200 mV. Lastly, epinine and dobutamine analysis in real specimens confirmed the proposed sensor's applicability with outstanding findings (recovery 96.0 to 103.5 %, and relative standard deviation <3.6 %).