Nondipole asymmetries of Kr photoelectrons were measured over the 11–8000 eV kinetic-energy range. Symmetry properties of angular distributions were exploited to eliminate the dependence of the measurements on the dipole anisotropy and the polarization properties of the photon beam. The measured asymmetries agree well with both full multipole relativistic and nonrelativistic first-order retardation calculations within the independent-particle approximation. Deviations of the measured asymmetries from predictions of the point-Coulomb retardation correction confirm the importance of screening on the continuum-wave normalizations and phase shifts.
1 March 2004 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
We have reinvestigated the decay of the three isomers of at the Holifield Radioactive Ion Beam Facility (HRIBF). Through the use of half-life information, we have been able to construct individual decay schemes for each isomer and correct what was a puzzling inconsistency with the published data, namely the feeding of states by a isomer. Our results indicate that the feeding of these levels arises from a isomer in . A total of -ray transitions ( new) were assigned to levels ( new) from the decay of . Significant deviations are observed from IBM-2 calculations for the decay of the and members of the previously assigned three-phonon quintuplet. Candidate states for the quadrupole-octupole quintuplet states and , , , , and broken-pair states are assigned.
Spontaneous imbibition (SI) is a capillary-driven flow process, in which a wetting fluid moves into a porous medium displacing an existing non-wetting fluid. This process likely contributes to the loss of fracking fluids during hydraulic fracturing operations. It has also been proposed as a method for an enhanced recovery of hydrocarbons from fractured unconventional reservoirs. Numerous analytical and numerical approaches have been employed to model SI. Invariably, these idealize a fracture as the gap formed between parallel flat surfaces. In reality, rock fracture surfaces are rough over multiple scales, and this roughness will influence the contact angle and rate of fluid uptake. We derived an analytical model for the early-time SI behavior within a fracture bounded by parallel impermeable surfaces with fractal roughness assuming laminar flow. The model was tested by fitting it to experimental data for the SI of deionized water into air-filled rock fractures. Twenty cores from two rock types were investigated: a tight sandstone (Crossville) and a gas shale (Mancos). A simple Mode I longitudinal fracture was produced in each core by compressive loading between parallel flat plates using the Brazilian method. Half of the Mancos cores were fractured perpendicular to bedding, while the other half were fractured parallel to bedding. The two main parameters in the SI model are the mean separation distance between the fracture surfaces, , and the fracture surface fractal dimension . The was estimated for each core by measuring the geometric mean fracture aperture width through image analysis of the top and bottom faces, while was estimated inversely by fitting the SI model to measurements of water uptake obtained using dynamic neutron radiography. The values ranged from 45 m to 190 m, with a median of 93 m. The SI model fitted the height of uptake versus time data very well for all of the rock cores investigated; medians of the resulting root mean squared errors and coefficients of determination were 0.99 mm and 0.963, respectively. Estimates of ranged from 2.04 to 2.45, with a median of 2.24. Statistically, all of the values were significantly greater than two, confirming the fractal nature of the fracture surfaces. Future research should focus on forward prediction through independent measurements of and extension of the existing SI model to late times (through the inclusion of gravity) and fractures with permeable surfaces.
This article presents the initial results of 2-D and 3-D neutron imaging of bronze artifacts using the CG-1D prototype beamline at the High Flux Isotope Reactor (HFIR) located at the Oak Ridge National Laboratory (ORNL). Neutron imaging is a non-destructive technique capable of producing unprecedented three-dimensional information on archaeomaterials, including qualitative, quantitative, and visual data on impurities, composition change, voids, and structure at macro-scale levels. The initial results presented in this publication highlight how information from neutron imaging can provide otherwise inaccessible details about the methods and materials that ancient craftspeople used in creating bronze objects