A method for the fabrication of flexible electrical circuits on polyaramid substrates is presented based on laser-induced carbonization followed by copper electroplating. Locally carbonized flexible sheets of polyaramid (Nomex), by laser radiation, create rough and highly porous microstructures that show a higher degree of graphitization than thermally carbonized Nomex sheets. The found recipe for laser-induced carbonization creates conductivities of up to ∼45 S cm–1, thereby exceeding that observed for thermally pyrolyzed materials (∼38 S cm–1) and laser carbon derived from Kapton using the same laser wavelength (∼35 S cm–1). The electrical conductivity of the carbonized tracks was further improved by electroplating with copper. To demonstrate the electrical performance, fabricated circuits were tested and improvement of the sheet resistance was determined. Copper films exhibit antimicrobial activity and were used to fabricate customized flexible antibacterial coatings. The integration of laser carbonization and electroplating technologies in a polyaramid substrate points to the development of customized circuit designs for smart textiles operating in high-temperature environments.
1 September 2023 in Current Directions in Biomedical Engineering
Within this work, the bacterial adhesion on biomimetic titanium nanostructures is investigated in fluidic flow. The motile, gram-negative bacteria strain Escherichia coli was used for the experiments and was incubated on nanostructured titanium, polished titanium and on the wings of the dragonfly Neuorbasis kaupi. After incubation period different flow velocities have been applied and the reduction of adhered bacteria was determined via fluorescence microscopy. Results show that nanostructured titanium surfaces have the ability to reduce the bacterial contamination as it is for the dragon fly wings used in this study. This behavior can also be predicted by analyzing the bearing area of the nanotopography which describes the actual part of the topography which is in contact to the bacteria.
1 September 2023 in Current Directions in Biomedical Engineering
Within this paper we demonstrate a novel approach to create antibacterial nanostructures on the implant material titanium grade 23 by a high-pressure oxidation method. Titanium samples were oxidized and resulting nanostructures were characterized using scanning electron microscopy and contact angle measurements. Antibacterial properties were tested using Escherichia coli and Bacillus subtilis as common lab strains. In addition, cytotoxicity was determined according to ISO 10993-5 standards. Results reveal that the fabricated nanostructures have similar antibacterial properties known from different insect wings like dragonflies or cicadas and have no cytotoxic effect.