The present review paper would celebrate the 25 years anniversary of the ESAFORM association by summarizing the studies performed by the delegates of the ESAFORM conference series within mini-symposium “Extrusion and Drawing” and of the papers published in the International Journal of Material Forming in the same fields. The 160 analyzed papers have been divided in four main categories corresponding to the paper main chapters (Hot Metal Extrusion, Cold Metal Extrusion, Polymer Extrusion and Drawing) then further divided in sub-chapters in order to group them in more specific research subjects. The aim of this review paper is then to provide to the reader a complete overview of the investigated topics and of the research trends over the years within the ESAFORM associate researchers.
24 February 2025 in Journal of Materials Science & Technology
The paper presents an innovative approach implemented in QForm UK Extrusion FEM software to analyse one of the core defects encountered in profile extrusion known as billet skin defect. The validation of the algorithm has been performed based on a number of experimental case studies taken from the literature [1,2]. Additionally, the sensitivity of the accuracy of the results to the variation in initial parameters has been analysed for both types of profile shapes: solid and hollow. Based on this, practical recommendations have been formalised for the successful industrial use of the presented algorithm.
3 September 2024 in Journal of Materials Engineering and Performance
Materials characterization and the knowledge of their elastic-plastic behavior are of fundamental importance for the design of industrial manufacturing processes. Nowadays, FEM simulation is the main tool used to optimize product quality and minimize scraps, and the numerical codes have evolved over the years to obtain accurate solutions with reduced computational times. Nevertheless, in order to perform reliable simulations, it is necessary to include accurate modeling of the material flow stress. Hot torsion is a powerful method for the characterization of the material flow stress because, tests can be carried out at constant speeds and temperatures, reaching large strain values, and thus getting over the limits of compression and tensile tests. In this paper the hot torsion characterization applied to AA6082 alloy is presented: tests were performed with equivalent strain rates of 0.01, 0.1, 1, and 10 s-1, in the temperature range from 440 to 550 °C (from 713.15 to 823.15 K). The results are presented in terms of equivalent stress vs equivalent strain. Finally, the material flow stress curve was predicted by the Hyperbolic sine model and Hensel-Spittel law, and the material parameters A, m1-9 are provided for the temperature expressed in °C and K.
-Experimental, analytical, and numerical analysis of the copper wire multi-pass drawing process DI DONATO Sara, NEGOZIO Marco, PELACCIA Riccardo, REGGIANI B