1 March 2018 in Journal of Geotechnical and Geoenvironmental Engineering
The failure modes of geocell-reinforced retaining walls differ from those of rigid retaining walls, for which only limited information is available in the literature. In the present study, a series of centrifuge model tests was carried out to investigate the performances of geocell-reinforced retaining walls at limit equilibrium under various conditions. Digital image analysis was employed to determine the displacement vectors of soil and geocell-reinforced soil, which were used to obtain the failure surface and -level at limit equilibrium. The effects of the geocell pocket size, geocell layer height, geocell membrane tensile stiffness, and backfill surface loading location on the stability and failure mode were investigated. In addition, the preferred layout of geocell-reinforced sections, additional reinforcement layers, and two-tiered geocell retaining walls were studied. The test results indicate that the stability of geocell-reinforced retaining walls could be improved by reducing the spans between the welded spots of geocells, increasing geocell-membrane stiffness, and connecting additional geogrid layers to geocell walls. Two-tiered geocell retaining walls performed better than single-tiered ones at the same height. It was also found that the limit equilibrium method for slope stability analysis may be employed to predict the stability and critical failure surfaces of geocell-reinforced retaining walls. Some limitations of the present study are also discussed.
1 April 2009 in Journal of Materials in Civil Engineering
Geocell flexible retaining wall is a new type of retaining structure constructed by stacking three-dimensional network geocells filled with soil or gravel. The writers analyzed the interaction among wall, reinforced layers, and fill using the finite element software, MARC, and evaluated the stress distribution of the geocell flexible retaining wall. Field testing was conducted to measure the lateral earth pressure of a geocell flexible retaining wall constructed on an expressway in central north China’s Shanxi Province. It was shown that the deformation of flexible retaining wall was significantly influenced by the width of wall, distance between adjacent reinforced layers, and foundation modulus. The width of wall affected the stress level noticeably. The horizontal displacement of reinforced layers increased as the external load applied on the fill behind the wall increased. The horizontal stress of tied reinforced layers developed in three phases: bending, stretching–bending, and stretching as the exte...
15 April 2019 in Geofluids
The soil-water characteristic curve (SWCC) is the basis for describing seepage, strength, and constitutive model of unsaturated soil. The existing SWCC models do not work accurately for evaluating loess, because they do not consider the pore deformation that is induced by wetting. The present study develops a new SWCC model for unsaturated loess. The model considers the effect of wetting-induced pore deformation (WIPD) on the SWCC. The new model includes 6 parameters, which could be confirmed by laboratory tests. The pore volume function (PVF) was described by the WIPD. The shift factor and the compression factor were introduced into the model. The relationship between the void ratio and and was established using the average pore radius. The new SWCC model for saturated loess was improved based on the classical van Genuchten (V-G) model. If the WIPD had not been considered, the new model would regress into the classical V-G model. SWCC tests of unsaturated loess with different void ratios were carried out to verify the new model. The model parameters were calibrated in the original state, and the SWCCs of different void ratios were predicted by the new model and found to be in good agreement with the test results.
1 December 2014 in Geosynthetics International
Since the 1980s, flexible geocell-reinforced retaining walls have been used more frequently for slope protection as an alternative to conventional retaining structures. The benefits of these geocell structures include light weight, rapid construction, cost-effectiveness, ecological protection and landscape enhancement. However, the deformation mechanisms and failure modes of geocell-reinforced retaining walls are often complicated, thereby restricting their use in engineering practice. The differences in failure behaviour between geocell-reinforced and rigid-facing retaining walls need to be identified. In the present study, a series of centrifuge model tests on retaining walls reinforced by geocells were performed. The tests varied with respect to aspect ratio (the reinforcement length to the height of the wall) and the slope inclination (horizontal to vertical). The experimental results indicate that the critical failure surface is a non-linear shape that passes through the toe of the wall and intersects with the back of the wall. As the aspect ratio decreased, the horizontal distance between the top of the critical failure surface and the wall increased, whereas the location of the critical failure surface intersecting with the wall moved downward. In the case of a smaller inclination angle, the critical failure plane had a compound shape that included part of the backfill material near the top portion of the wall. In the case of a larger inclination angle, the size of the sliding zone was small and the failure was mainly due to sliding of the wall along the slope. The internal displacement distributions in the sliding zone were measured using digital image analysis and indicated that the locations of the maximum lateral face displacement in geocell retaining walls differs from those in conventional rigid retaining walls.
1 January 2019 in Advances in Civil Engineering
Loess is a kind of special soil with structure and hydrocollapse behavior; due to the particularity of loess, the deformation regularity of the tunnel in loess shows different characteristics from those in rock. To ensure the safety of construction, crown settlement (CS) and horizontal convergence (HC) are widely used to assess the stability of the tunnel structural system. Based on statistical analysis, this study focused on analyzing the influence of cover depth on the deformation of surrounding rock of loess tunnels by ANOVA, and relationships between them were presented by regression analysis. The achieved results indicated that the influence of cover depth on deformation was not obvious in shallow tunnels, while the cover depth had a significant effect on deformation in deep tunnels. Based on the difference of influence of cover depth on deformation between shallow tunnels and deep tunnels, a method for determining the cover depth threshold (CDT) in the tunnel by statistical analysis was proposed. The horizontal and vertical deformations in shallow tunnels were discrete and obeyed the positive distribution, mainly concentrated within 200 mm. The deformation allowance in shallow tunnels was recommended to be 200 mm. In deep tunnels, as the cover depth increased, the deformation increased linearly, while the CS/HC decreased.