10 October 2022 in IEEE Transactions on Antennas and Propagation
A novel irregular phased array tiled by subarrays composed of two isolated elements (SCTIE) is proposed in this paper. At first, reasons of significant directivity drop in traditional polyomino-shaped irregular arrays in large-angle scanning scenario are investigated. To reduce the quantization errors of the excitations, the two elements in this proposed irregular array are interleaved with one element which belongs to another subarray. Secondly, to solve the complex double-element irregular subarray tiling problem, a new approach named Subarray Rotation Algorithm based on Monte Carlo algorithm is proposed. Since the problem is no longer regarded as a nonlinear pure integer programing problem as that in previous research but a simplified element-location transformation problem, the proposed method can dramatically reduce the optimization time to 0.07% for an array as large-scale as 36×36. Consequently, through the two steps of array tiling generation and excitation coefficients optimization, better radiation performance is realized based on the SCTIE-shaped irregular arrays compared with conventional domino-shaped arrays. In addition, the proposed irregular array achieves stable performance in a broad frequency band and in different array scales. Finally, several numerical examples are presented to verify the proposed method.
8 November 2023 in IEEE Antennas and Wireless Propagation Letters
A wideband dual-polarized planar phased antenna array with an ultra-low profile is proposed in this paper. Under the stringent restriction of a low profile of 0.04 λ c (wavelength at the center frequency), the array is inevitably challenged by a significant impedance mismatch when large scanning angles are desired. By integrating the open stubs and extended metal strips into the feeding networks, the strong current imbalance is mitigated, thereby achieving wideband and wide-angle scanning application. Finally, an impedance bandwidth of 2 ∼ 2.9 GHz with the active voltage standing-wave ratio (VSWR) nearly less than 3 is achieved when the steering angle is up to ±60° in both E and H planes. A 5×5 array prototype is fabricated and measured to validate the effectiveness of the proposed design.
20 September 2021 in Journal of Superconductivity and Novel Magnetism
Mechanical power transmission (MPT) components are almost indispensable for every engineering equipment with motions. In order to satisfy some rigorous requirements, such as contamination free and zero leakage in the mixing process of biomedical solutions, a contactless MPT mode was proposed in this study based on the high-Tc superconducting flux pinning mechanism. It makes the stirring container with the driven part inside that can be totally isolated from the external environment. The physical principle of superconducting flux pinning effect was discussed firstly to explore a feasible structural scheme, which can completely restrain all the six degrees of freedom (DOFs) by the linkage of magnetic flux lines. Then, a measurement device was established to verify and investigate the proposed contactless MPT mode. The motion can be transferred synchronously from the superconducting driving part to the permanent magnet driven part since they are unified as an integrity through the pinned flux lines. The influence of driving speed, cooling clearance, and magnet arrangement on the transmitted torque was analyzed. The verified contactless MPT mode also has the advantages of self-stability and overload protection, which can avoid the drawbacks of traditional permanent magnetic transmission mode.
24 February 2021 in IEEE Antennas and Wireless Propagation Letters
A linear phased array antenna fed by the modified dielectric image line (DIL) is proposed in this letter. The array contains 16 subarrays, and one subarray consists of eight patch antenna elements fed by one modified DIL through eight coupling apertures on the ground plane. The modified DIL can enhance the electromagnetic field confinement in the DIL, which is beneficial to reduce the mutual coupling between parallel DILs. According to the measured results, the coupling between two modified DILs has been reduced by about 5 dB compared with that in the original DILs when the length is 160.5 mm. Finally, the proposed array achieves a wide fractional bandwidth of over 20% with voltage standing-wave ratio (VSWR) less than 2.5 when scanning up to ±60° in the H-plane in 8∼10 GHz. The isolation between the two adjacent ports is higher than 20 dB. A 16 × 8 array prototype is measured to verify the validity of the design.