1 August 2020 in Solar Energy
DCDagoberto Cabrera-German
HCHugo J. Cortina-Marrero
3 September 2019 in Journal of Materials Science: Materials in Electronics
ACAsiel N. Corpus-Mendoza
+1
8 August 2024 in Physica Scripta
Perovskite-based solar cells (PSCs) have demonstrated remarkable high power conversion efficiency in recent years. However, the use of mono-organic cations (such as Methylammonium or Formamidinium) limits the potential for large-scale development due to potential degradation under environmental conditions. The incorporation of multi-cations has emerged as a strategy to enhance both performance and stability. The cesium (Cs) cation represents a solid alternative for partial substitution of Formamidinium. However, the initial concentration of precursors in the solution is often reported without establishing the final concentration of the cation present in the thin films. Herein, the incorporation of Cs cations into the FAPbI3 structure to produce a CsxFA(1-x)PbI3 perovskite with different values of x using a one-step spin coating process is demonstrated. Assessing the structural and optical properties, it is demonstrated that CsxFA(1-x)PbI3 films behave according to Vegard’s law for values of x between 0 and 0.66. In particular, CsxFA(1-x)PbI3, with an x concentration of 0.33 exhibits a cubic lattice parameter of 6.28 Å, lower than that for FAPbI3 but higher than that for CsPbI3. This concentration showed stability of the dark phase under ambient conditions for extended periods. In addition, this material has a bandgap of 1.5 eV, making it suitable for use in solar cells.
15 February 2024 in Optical Materials
JVJazmín Yuritzi Valenzuela-López
Jazmín Yuritzi Valenzuela-López
JCJaquelina Camacho-Cáceres
Jaquelina Camacho-Cáceres
+3
27 January 2022 in IEEE Journal of Photovoltaics
Current–voltage ( I – V ) curve measurement is a widely used method to estimate the power conversion efficiency of a solar cell. Depending on the capacitance of the cell, a capacitive current could be induced by the voltage scanning speed ( vs ) that may affect the resulting I – V curve. However, in some source measure units (SMU), the relation of vs with the user controlled or external parameters is not explicit. In this article, we prepare and test three types of perovskite solar cells (PSCs), which include n-i-p and p-i-n structures, as well as mesoporous and planar cells. After a detailed analysis of the total testing time as a function of external parameters, it is found that there are internal parameters whose values are chosen by the SMU according to the selected external parameters to avoid longer testing times. As a result, vs can be explicitly described as a function of both external and internal parameters. For higher capacitive PSCs, smaller vs values reduce charge accumulation and lead into higher current (efficiency) and lower hysteresis index. A careful selection of the measuring parameters in a solar simulator and SMU is necessary to minimize testing artifact on capacitive PSCs.
26 December 2024 in International Journal of Circuit Theory and Applications
PAPaola Gabriela Abrego‐Martínez
Paola Gabriela Abrego‐Martínez
CRCarlos A. Rodríguez‐Castañeda
Carlos A. Rodríguez‐Castañeda
+1