1 November 2024 in Light: Science & Applications
The growing focus on enhancing color quality in liquid crystal displays (LCDs) and organic light-emitting diodes (OLEDs) has spurred significant advancements in color-conversion materials. Furthermore, color conversion is also important for the development and commercialization of Micro-LEDs. This article provides a comprehensive review of different types of color conversion methods as well as different types of color conversion materials. We summarize the current status of patterning process, and discuss key strategies to enhance display performance. Finally, we speculate on the future prospects and roles that color conversion will play in ultra-high-definition micro- and projection displays.
8 January 2026 in Science
Multivalent, resonance-stabilized amidinium ligands enable stronger chemical coordination and reduced deprotonation compared with conventional monovalent ammonium ligands in low-dimensional perovskites. Here, we introduce a controllable one- to two-dimensional (1D-to-2D) structural transition strategy by systematically tuning ligand conformation, thereby modulating hydrogen bonding, π–π stacking, and basicity to elucidate the relationship between molecular structure, interfacial interactions, and resulting dimensionality. The 1D-amidinium perovskite structure, with its pronounced geometric anisotropy, impedes uniform surface coverage and defect passivation. In contrast, the 2D-amidinium perovskite forms a continuous, homogeneous interfacial layer, enabling more effective defect passivation and favorable energy-level alignment. With dimensionality control, inverted 3D/2D-amidinium perovskite solar cells deliver 25.4% power conversion efficiency (1.1 square centimeters, steady-state certified) and maintain >95% of their initial efficiency after 1100 hours of continuous 1-sun operation at 85°C.
19 December 2019 in IEEE Electron Device Letters
Vertical channel InSnO (ITO)-stabilized ZnO thin-film transistors (TFTs) with a channel length of 300 nm were developed and fabricated. These TFT devices exhibited low off-state leakage current and gate leakage current coming into the scale of 10-14 A. In addition, a high on/off current ratio was achieved, up to 107, with a drain voltage of 0.01 V. The effects of the overlap area between the source and drain region on the electrical performance of the proposed vertical TFTs were investigated. The results showed that the vertical channel ITO-stabilized ZnO TFTs with a smaller overlap exhibited a better switching speed, whether in DC or AC mode. The proposed vertical channel ITO-stabilized ZnO TFTs may be promising for application in flexible and high-density electronics.
15 March 2022 in IEEE Transactions on Electron Devices
Self-assembled monolayer (SAM) treatment of gate dielectrics is a standard process for manufacturing organic thin-film transistors (TFTs) to reduce interface trap density and surface energy. However, it is rarely used for oxide semiconductor-based TFTs because the SAMs may be damaged during the manufacturing process. To explore the feasibility of using a SAM-treated gate dielectric to improve the performance of oxide TFTs, we study the effects of different SAM treatments of the gate dielectric layer on the performance of InSnZnO (ITZO) TFTs, which can help guide the selection of SAMs. After treatment with methyltriethoxysilane (C1-SAM), the performance of the TFTs is significantly improved, showing a drastic improvement in the ON/ OFF ratio and carrier mobility, and a reduction of the interface trap density and ${V}_{\text {th}}$ shift of the device under positive/negative bias stress (PBS/NBS). However, after treatment with n-octyltriethoxysilane (C8-SAM) and octadecyltriethoxysilane (C18-SAM), the performance of the TFTs deteriorate or even fail. Nevertheless, this work demonstrates an effective strategy for the construction of high-performance metal oxide TFTs, though it may require careful selection of the SAMs.
23 February 2026 in Nature Materials
Vacuum-based deposition is a scalable, solvent-free industrial method ideal for uniform coatings on complex substrates. However, all-vacuum-deposited perovskite solar cells fabricated by thermal evaporation trail solution-processed counterparts in efficiency and stability due to film quality challenges, necessitating advancement and improved understanding. Here, we report a co-evaporation route for 1.67-eV wide-bandgap perovskites by introducing a PbCl 2 co-source to optimize film quality. We promote perovskite formation with pronounced (100) ‘face-up’ orientation and deliver a certified all-vacuum-deposited solar cell with 18.35% efficiency (19.3% in the laboratory) for 0.25-cm 2 devices (18.5% for 1-cm 2 cells). These cells retain 80% of peak efficiency after 1,080 h under the ISOS-L-2 protocol. Leveraging operando hyperspectral imaging, we provide spatiotemporal spectral insight into halide segregation and trap-mediated recombination, correlating microscopic luminescence features with macroscopic device performance while distinguishing radiative from non-ideal recombination channels. We further demonstrate 27.2%-efficient 1-cm 2 evaporated perovskite-on-silicon tandem cells and outdoor stability of all-vacuum-deposited tandems in Italy, retaining ~80% initial performance after eight months.