Lignin as the most abundant source of aromatic chemicals in nature has attracted a great deal of attention in both academia and industry. Solvolysis is one of the promising methods to convert lignin to a number of petroleum-based aromatic chemicals. The process involving the depolymerization of the lignin macromolecule and repolymerization of fragments is complicated influenced by heating methods, reaction conditions, presence of a catalyst and solvent systems. Recently, numerous investigations attempted unveiling the inherent mechanism of this process in order to promote the production of valuable aromatics. Oxidative solvolysis of lignin can produce a number of the functionalized monomeric or oligomeric chemicals. A number of research groups should be greatly appreciated with regard to their contributions on the following two concerns: (1) the cracking mechanism of inter-unit linkages during the oxidative solvolysis of lignin; and (2) the development of novel catalysts for oxidative solvolysis of lignin and their performance. Investigations on lignin oxidative solvolysis are extensively overviewed in this work, concerning the above issues and the way-forward for lignin refinery.
12 October 2015 in ACS Applied Materials & Interfaces
Biodegradable poly(dl-lactic acid) (PLA) and poly(lactic-co-glycolic acid) (PLGA) microparticles with tunable size, shape, internal structure and surface morphology were produced by counter-current flow focusing in axisymmetric (3D) glass capillary devices. The dispersed phase was composed of 0.5–2 wt % polymer solution in a volatile organic solvent (ethyl acetate or dichloromethane) and the continuous phase was 5 wt % aqueous poly(vinyl alcohol) solution. The droplets with a coefficient of variation in dripping regime below 2.5% were evaporated to form polymeric particles with uniform sizes ranging between 4 and 30 μm. The particle microstructure and surface roughness were modified by adding nanofiller (montmorillonite nanoclay) or porogen (2-methylpentane) in the dispersed phase to form less porous polymer matrix or porous particles with golf-ball-like dimpled surface, respectively. The presence of 2–4 wt % nanoclay in the host polymer significantly reduced the release rate of paracetamol and prevented ...
28 August 2019 in ACS Sustainable Chemistry & Engineering
This work showcases an innovative route for bio-compounds upgrading via hydrodeoxygenation (HDO) reactions eliminating the need for external high-pressure hydrogen supply. We propose the use of water as reaction media and the utilisation of multifunctional catalysts able to conduct multiple steps such as water activation and HDO. In this study, we validate our hypothesis in a high-pressure batch reactor process using guaiacol as a model compound and multicomponent Ni-based catalysts. In particular, a comparison between and ceria-supported and carbon/ceria-supported samples is established being the carbon-based materials the suitable choice for this reaction. The physicochemical study by XPS, TEM, XRD, TPR, reveals the greater dispersion of Ni clusters and the strong metal-support interaction in the carbon/ceria-based samples accounting for the enhanced performance. In addition, the characterisation of the spent samples points out the resistance of our catalysts towards sintering and coking. Overall the novel catalytic approach proposed in this paper opens new research possibilities to achieve low-cost bio-oil upgrading processes.
12 October 2020 in ACS Sustainable Chemistry & Engineering