The development and improvement of thin film deposition techniques is an important research topic to obtain new materials at submicro and nano scale with high homogeneity and thickness control. Here, we designed and built an automated device for the deposition of binary or ternary compound films using Successive Ionic Layer Adsorption and Reaction (SILAR). The instrument is integrated by three different systems. The first system consists of a mobile platform of two degrees of freedom. The second part has an 8-bit microcontroller used to adjust the velocities along the horizontal and vertical axes. The third, the control system, uses a mobile app that can be implemented in smart devices, developed in free code software for programming and monitoring the main deposition parameters of the SILAR device such as the number of cycles, the immersion and emersion velocities, the residence time at each step, and the number of reactors. The performance of our instrument was verified through the deposition of PbS films, varying the number of deposition cycles to study the variations in the film thickness and structure, and assessed by profilometry, Raman spectroscopy, X-ray diffraction and atomic force microscopy. The system demonstrated is useful to obtain crystalline films with controllable thicknesses.
In this study, we report the effect of ZnO film thickness on its optical and structural properties. The sol solution was synthesized by sol-gel method and deposited on silicon substrates by spin coating technique. The ZnO films thickness was varied from 60 to 180 nm. The ZnO films obtained showed a highly preferred orientation along the (002) plane. It was also observed that the crystallite size was not affected by increasing thickness. Transmittance measurements indicated that the ZnO films have a high transparency in the visible range (~90 %), which remained constant with thickness. Morphological evolution measurements confirmed that the thinner ZnO film consist mostly of a porous layer which became homogeneous and compact to increase the thickness. Photoluminescence measurements exhibit a strong ultraviolet (UV) emission, and the emission intensity was improved with thickness due to crystallinity enhancement.
The local electrical response in alkaline-doped CuInSe2 films prepared by single-step electrodeposition onto Cu substrates was studied by current-sensing atomic force microscopy. The CuInSe2 (CIS) films were prepared from single baths containing the dopant ions (Li, Na, K or Cs) and were studied by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy and photocurrent response. Increased crystallinity and surface texturing as the ion size increased were observed, as well as an enhanced photocurrent response in Cs-doped CIS. Li- and Na-doped films had larger conductivity than the undoped film while the K- and Cs-doped samples displayed shorter currents and the current images indicated strong charge accumulation in the K- and Cs-doped films, forming surface capacitors. Corrected current-sensing AFM IV curves were adjusted with the Shockley equation.