31 October 2024 in Journal of Microelectromechanical Systems
This paper details the design, fabrication, and characterization of a novel disposable MEMS airflow sensor, employing Bare Conductive electric paint deposited on Whatman 3MM chromatography paper through silk screen printing. The sensor achieves rapid fabrication within 30 minutes. It demonstrates a sensitivity of 1.8 kPa $^{-1}$ , a resolution of 27.6 kPa, and a limit of detection (LoD) of 48.94 kPa, with an operational pressure range from 27.6 to 137.9 kPa. An electronic readout circuit transduces electrical resistance variations into voltage signals, which are monitored via a digital multimeter and analyzed on a PC. The sensor’s disposable nature mitigates nosocomial infection risks and enhances hygiene, making it ideal for monitoring respiratory conditions such as asthma and COPD. With a material cost of under $0.1, the sensor is highly suitable for scalable, cost-sensitive biomedical applications. Experimental validation confirms the reliability and precision of this proof-of-concept device in airflow measurement. 2024-0148
17 June 2022 in IEEE Sensors Journal
This work demonstrates the design, implementation, and experimental results of a low-cost disposable flexible sensor system capable of both impact localization and measurement. The proposed flexible sensor structure utilizes a special series of Bristol paper as the main fabrication material, which is coated with electric paint graphite paste and silver paste. The implemented sensor system uses a planar absolute encoder-like sensing topology to locate the impact and has a low-cost and quick manufacturing process. The size of the structure is 210×18.56 mm with a thickness of approximately 340 μm. It has an electronic read-out consisting of three identical Wheatstone bridge circuits and instrumentation amplifiers for each bit. It can detect the external forces in the range of 0.6N to 12N with a spatial resolution of 2.4 cm and 0.55 cm in horizontal and vertical axes, respectively. The proposed sensor structure is tested in a series of experiments using a robotic setup consisted of a pantograph mechanism and a direct drive linear motor. The experiments illustrate the results with measurement sensitivity as small as 1N and proper fatigue resilience against repetitive loads.
28 March 2020 in Turkish Journal of Electrical Engineering and Computer Sciences
18 December 2025 in Sensors and Actuators A: Physical
17 January 2025 in Flexible and Printed Electronics
This work presents the design, implementation, and characterization of a piezoresistive force sensor integrated into a flexible printed circuit board (FlexPCB). We propose a flexPCB-based MEMS sensing system with graphite as the sensing element and polyimide as the principal substrate material, intended for disposable and low-cost applications. The sensor, which was manufactured using a conventional PCB technique and silk-screen printing, can detect biomolecules attached to nanomagnetic particles with an apparent weight of 0.209 V/V · mg−1 when exposed to an applied magnetic field. Within a detection range of 0–80 µg, the sensor delivers a resolution of 10 µg and a limit of detection of 21.16 µg. While the detection limit reflects the weight of the nanomagnetic particle, the actual sensitivity to the biomolecule is substantially higher, allowing the system to detect lower biomolecule quantities effectively.
25 March 2026 in IEEE Sensors Journal
This paper presents a refreshable microfluidic Braille display system fabricated from polydimethylsiloxane (PDMS), offering a transparent, low-cost, and fast-response haptic interface. The device architecture adheres to the standardized Braille dot configuration, wherein characters are generated via fluidic-driven inflation of elastomeric membranes. To reduce fluidic and control complexity, the system is designed to display an identical Braille character across all cells simultaneously; the visually impaired reader nonetheless perceives different letters as a function of fingertip position, even though a single character is rendered repeatedly over the entire display area. Circuit-level modeling of a four-cell prototype is presented, and the capability to render a three-letter word in conjunction with integrated finger-tracking functionality is experimentally demonstrated. The transient membrane response is characterized and compared with analytical predictions, confirming that the refresh rate exceeds typical finger-scanning speeds of visually impaired users. Owing to its optical transparency, the proposed system can be integrated with smartphones or tablets, thereby enabling simultaneous access to identical digital content by both sighted and visually impaired users.